Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X80-10 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 80mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke80 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10
The AirTAC SAUJ100X80-10 is a double-acting double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you trim the working stroke by up to 10 mm, giving a usable range of 70-80 mm without buying a new actuator. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. Note this SKU lacks a magnet and cannot take a sensor.
Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10 Technical Specifications
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10 Is Used
Press Fit Tuning
Allows on-site stroke reduction up to 10 mm to perfect bearing insertion depth without remachining the fixture.
Gripper Jaw Calibration
Dial in the exact 70-80 mm extend position for varying part sizes directly at the assembly station.
End-of-Line Forming
Adjusts the mechanical stop for precise material bending or crimping depth on short production runs.
Is the Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10 the Right Cylinder?
Choose the SAUJ over a fixed SAU when you need final end-position tuning during machine commissioning. The 10 mm adjust window is ideal for fine-tuning clamping or pressing depth. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. This non-magnet version cannot accept CMSG or DMSG sensors. For an 80 mm stroke, ensure external guidance to prevent side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10 FAQ
Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The nominal 80 mm extend stroke can be shortened by up to 10 mm via the external stop screw, yielding a 70-80 mm working window.
The external stop screw mechanically sets the extend end position but is not a load lock. A plain cylinder drifts on air loss; the 29 mm air cushion only decelerates near stroke end. For held loads, use an external rod lock or pilot-operated check valve. Also, this SKU lacks a magnet, so it cannot accept position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUJ100 Adjustable Cylinder SAUJ100X80-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.