This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI80X60SN, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI80 Standard Air Cylinder SI80X60SN
The AirTAC SI80 Standard Air Cylinder SI80X60SN is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 60mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI80X60SN, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke60 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAI80X60SN
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI80 Standard Air Cylinder SI80X60SN
The AirTAC SI80X60SN is a discontinued double-acting ISO 15552 profile cylinder. It delivers 2513 N of push force at 0.5 MPa through an 80 mm bore and features a G3/8 air port. AirTAC replaced this legacy unit with the SAI80X60SN, a direct replacement retaining the exact same interface, 60 mm stroke, output force, and mounting accessories.
The SAI upgrade introduces a refined piston seal utilizing two Y-shaped one-way elements for extended lifespan and lower start-up pressure. This -SN variant includes a piston magnet for CS1-B/DS1-B legacy sensors and uses NBR seals rated for -20 to +70 C (a Viton H option extends this to 150 C).
Airtac SI80 Standard Air Cylinder SI80X60SN Technical Specifications
| Model | Airtac SI80 Standard Air Cylinder SI80X60SN |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI80X60SN |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI80X60SN carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAI80X60SN produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI80 Standard Air Cylinder SI80X60SN
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI80 Standard Air Cylinder SI80X60SN Is Used
Mid-Tonnage Pressing
Applies the 2513 N push force at 0.5 MPa for seating bearings, stamping light sheet metal, or clinching components in automated assembly lines.
Package Diversion
Executes 60 mm strokes to actuate routing gates or pusher arms, redirecting heavy cartons up to 128 kg off a main conveyor belt.
Pallet Lift Gates
Drives short-stroke lifting mechanisms for pallet stops and transfer sections, utilizing the robust 25 mm piston rod to absorb side impacts.
Replacing the Airtac SI80 Standard Air Cylinder SI80X60SN with the SAI80X60SN
To replace the SI80X60SN, order the SAI80X60SN. Verify your ISO 15552 mounting fixture, the G3/8 port thread (PT/G/NPT), and the M20x1.5 rod-end connection. The integrated magnet (-S) allows for legacy CS1-B/DS1-B switches, though the SAI replacement family utilizes current AirTAC sensors. When sizing, note the 80 mm bore yields 2513 N push and 2268 N pull at 0.5 MPa; dropping to a 63 mm bore reduces push to 1559 N, while an 80 mm bore at 0.7 MPa increases push to 3518 N. Remember that a standard cylinder drifts without live air; the adjustable 36 mm cushions only decelerate near stroke end. For secure load holding, consider an external pilot check valve or the SAIL/BSAI lock variants.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI80X60SN
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI80 Standard Air Cylinder SI80X60SN FAQ
Yes, the AirTAC SI80X60SN is discontinued and end-of-life. The direct replacement is the SAI80X60SN. It is dimensionally interchangeable per ISO 15552, offering the exact same 80 mm bore, 60 mm stroke, force, G3/8 port, and mounting interface.
The bore is 80 mm with a G3/8 air port. Force output is 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and 4523 N push at 0.9 MPa. The theoretical maximum force is 513 kgf at 1.0 MPa.
Related AirTAC SAI Cylinders
Request a Quote for the SAI80X60SN
Send us the quantity and destination. We confirm price, stock and lead time on the SAI80X60SN replacement — usually within 7-8 hours.