This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X100-75 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X100-75 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X100-75, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke100 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X100-75
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75
The AirTAC SIJ80X100-75 is a discontinued double-acting single-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 75mm on-site, yielding a usable 25-100mm extension from the 100mm nominal maximum. This 80mm bore delivers 2513N push and 2268N pull at 0.5MPa, features a G3/8 port, and includes 36mm adjustable air cushions.
The exact drop-in replacement is the SAIJ80X100-75, matching the interface, force, and mounting. The SAIJ upgrade uses a two Y-shaped one-way piston seal for low start-up pressure and long life. Computed buyer insight: safe working load is ~1508N (60% of the 0.5MPa push), allowing a ~128kg vertical lift with a 2:1 margin. The stop sets end position only; it is not a load lock, and this non-S SKU cannot take a magnetic switch.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75 Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X100-75 |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X100-75 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X100-75 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75 Is Used
Variable Depth Forming
Needs field stroke tuning to set precise metal stamping depths on-site without swapping cylinders.
Adjustable Package Diverter
Needs field stroke tuning to alter the extend reach for varying box widths on a sorting line.
Multi-Height Pallet Stop
Needs field stroke tuning to trim the extend stop position for different pallet load heights.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75 with the SAIJ80X100-75
Replace the SIJ80X100-75 directly with the SAIJ80X100-75. When sizing both ways, the neighboring 63mm bore yields 1559N push, while the 100mm bore yields 3927N push at 0.5MPa. Choose the 75mm adjust window if you need to cut the 100mm nominal extension down to a 25mm minimum on-site. Reuse FA, LB, or TC ISO 15552 mounts. Because this SKU lacks the -S suffix, it cannot accept a magnetic switch. For strokes >=300mm, verify side-load limits. Note the stop screw sets end position but is not a lock; for held loads use SAIL/BSAI or an external rod lock.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X100-75
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X100-75 FAQ
Yes, the SIJ80X100-75 is discontinued. The exact drop-in replacement is the SAIJ80X100-75, matching the ISO 15552 interface, 80mm bore, 100mm stroke, 75mm adjust window, and G3/8 port.
The 80mm bore provides 2513N push and 2268N pull at 0.5MPa, 3518N push at 0.7MPa, and 4523N push at 0.9MPa. The external stop screw window is 75mm, shortening the 100mm nominal extend stroke down to 25mm. The stop sets end position only and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X100-75
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X100-75 replacement — usually within 7-8 hours.