This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X1000-40 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X1000-40 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X1000-40, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X1000-40
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40
The AirTAC SIJ80X1000-40 is a double-acting single-rod ISO 15552 adjustable-stroke cylinder with a 1000 mm nominal extend stroke. An external stop screw lets you trim the extend stroke by up to 40 mm on-site, giving a usable window of 960-1000 mm. This 80 mm bore uses a G3/8 port, a 25 mm rod with an M20x1.5 thread, and 36 mm adjustable air cushions. The stop sets the end position but is not a load lock; without live air the piston drifts.
This SIJ model is discontinued; the exact drop-in replacement is the SAIJ80X1000-40, retaining the same interface, force, port, and mounting. The SAIJ upgrade uses a two Y-shaped one-way piston seal for low start-up pressure and long life. Force is 2513 N push and 2268 N pull at 0.5 MPa, or 3518 N at 0.7 MPa. Computed buyer insight: safe working load is about 1508 N (60% of the 0.5 MPa push), yielding a 128 kg vertical lift with a 2:1 margin.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40 Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X1000-40 |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X1000-40 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X1000-40 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40 Is Used
Long-stroke press ejection
Tuning the 1000 mm extend by up to 40 mm on-site lets operators dial in the exact ejection point for varying part depths without changing the cylinder.
Adjustable transfer push-off
Trimming the extend stroke accommodates different package widths on a transfer line, ensuring items push cleanly to the next belt without repositioning stops.
Variable-height pallet stops
The external stop screw provides a field-adjustable end position for diverter arms handling mixed pallet heights, setting the precise 960-1000 mm reach.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40 with the SAIJ80X1000-40
To replace the discontinued SIJ80X1000-40, order the drop-in SAIJ80X1000-40, keeping the 1000 mm max stroke and 40 mm adjust window. When sizing both ways, the neighboring 63 mm bore yields 1559 N push at 0.5 MPa, while the 100 mm bore yields 3927 N. Choose the 40 mm adjust window if you need on-site tuning between 960-1000 mm; for fixed stops, a standard SAI cylinder is simpler. Mounting reuses ISO 15552 FA, LB, or TC interfaces. This SKU lacks the -S magnet, so it cannot accept a magnetic switch. For the 1000 mm stroke, use an external guide to prevent rod bending and manage side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X1000-40
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1000-40 FAQ
Yes, the SIJ80X1000-40 is discontinued. The exact drop-in replacement is the SAIJ80X1000-40, which matches the ISO 15552 interface, 80 mm bore, 1000 mm stroke, 40 mm adjust window, G3/8 port, and mounting.
The 80 mm bore provides 2513 N push and 2268 N pull at 0.5 MPa, 3518 N at 0.7 MPa, and 4523 N at 0.9 MPa, with a 513 kgf max at 1.0 MPa. The external stop screw trims the extend stroke by up to 40 mm on-site (usable 960-1000 mm). The stop sets end position only; it is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X1000-40
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X1000-40 replacement — usually within 7-8 hours.