This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X1060-100 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X1060-100 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 1060mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X1060-100, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke1060 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X1060-100
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100
The AirTAC SIJ80X1060-100 is a discontinued double-acting single-rod ISO 15552 adjustable-stroke cylinder with an 80mm bore and 1060mm maximum stroke. An external stop screw lets you trim the extend stroke by up to 100mm on-site, yielding a usable 960-1060mm extension window. It delivers 2513N push and 2268N pull at 0.5MPa via a G3/8 port. The exact drop-in replacement is the SAIJ80X1060-100, matching the interface, force, and mounting.
The SAIJ successor retains the 25mm rod and 36mm cushions but upgrades to a two Y-shaped one-way piston seal for lower start-up pressure. Computed buyer insight: safe working load is roughly 1508N (60% of the 0.5MPa push), allowing a 128kg vertical lift with a 2:1 margin. The stop screw sets end position only; it is not a load lock. Without live air, the piston drifts, so use an external rod lock or the SAIL/BSAI variants for held loads.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100 Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X1060-100 |
| Bore size | Ø80 mm |
| Stroke | 1060 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X1060-100 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X1060-100 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×1060 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100 Is Used
Variable-Length Pressing
Allows operators to fine-tune the exact 960-1060mm extend contact point on-site for long-stroke pressing tasks without changing the cylinder body.
Adjustable Transfer Rejector
Accommodates changing product sizes on a line by adjusting the extend stroke limit up to 100mm, ensuring precise rejection mechanics.
Variable-Height Positioning
Sets specific reach endpoints for material handling equipment where the exact extension distance must be dialed in during commissioning.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100 with the SAIJ80X1060-100
To replace this discontinued SIJ80X1060-100, order the SAIJ80X1060-100 drop-in, reusing your existing FA, LB, or TC ISO 15552 mounts. When sizing both ways, the adjacent 63mm bore yields 2182N push at 0.7MPa, while the 100mm bore yields 5497N push at 0.7MPa. Choose the 100mm adjust window if you need maximum field flexibility over the 960-1060mm extension range. This SKU lacks the -S magnet, so it cannot accept a magnetic switch for position sensing. Because the 1060mm stroke exceeds 300mm, ensure external guides are used to prevent rod bending and manage side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X1060-100
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X1060-100 FAQ
Yes, the SIJ80X1060-100 is discontinued. The exact drop-in replacement is the SAIJ80X1060-100, which shares the identical ISO 15552 interface, 80mm bore, 1060mm stroke, 100mm adjust window, G3/8 port, and mounting options. The SAIJ family also features an upgraded two Y-shaped one-way piston seal for longer life.
The 80mm bore provides 2513N push and 2268N pull at 0.5MPa, 3518N push at 0.7MPa, and 4523N push at 0.9MPa, with a theoretical max of 513kgf at 1.0MPa. The external stop screw window is 100mm, allowing the extend stroke to be shortened from the 1060mm maximum down to 960mm. The stop sets end position only and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X1060-100
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X1060-100 replacement — usually within 7-8 hours.