This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X175-100S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X175-100S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 175mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X175-100S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke175 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X175-100S
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S
The AirTAC SIJ80X175-100S is a double-acting single-rod ISO 15552 adjustable-stroke cylinder, now discontinued and replaced by the drop-in SAIJ80X175-100S. It features an 80mm bore, G3/8 port, and a 175mm nominal stroke that you can trim by up to 100mm on-site via an external stop screw, yielding a usable extend range of 75-175mm. This stop sets the end position but is not a load lock. Delivering 2513N push and 2268N pull at 0.5MPa (4523N at 0.9MPa), the SAIJ successor retains the exact interface, force, and mounting.
The SAIJ replacement adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. For sizing, the 2513N push force at 0.5MPa yields a safe working load of roughly 1508N, or a 128kg vertical lift with a 2:1 margin. The -S suffix provides a piston magnet for legacy CS1-B/DS1-B switches. Note that a plain cylinder drifts on air loss; for held loads use an external rod lock or the SAIL/BSAI lock variants.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X175-100S |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X175-100S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X175-100S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S Is Used
Variable Depth Forming
A press operation requiring field stroke tuning to alter the extend stroke by up to 100mm, adjusting the forming depth for different material thicknesses without swapping the entire cylinder.
Adjustable Transfer Pusher
A packaging line where the extend stroke must be trimmed on-site to push varying box sizes, using the 75-175mm usable range to accommodate different carton dimensions dynamically.
Variable Height Diverter
A sortation system needing field stroke tuning to deflect items of varying heights, using the external stop screw to set precise end positions for each product run.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S with the SAIJ80X175-100S
To replace the discontinued SIJ80X175-100S, order the drop-in SAIJ80X175-100S, matching the 80mm bore, 175mm stroke, and 100mm adjust window. When sizing both ways, the neighboring 63mm bore yields 1559N push at 0.5MPa, while the 100mm bore yields 3927N push at 0.5MPa. The 100mm adjust window allows you to trim the extend stroke down to 75mm on-site without adding external stops. Reuse existing FA, LB, or TC ISO 15552 mounts. The -S suffix confirms the piston magnet is present for legacy CS1-B/DS1-B switches. For stroke lengths of 300mm or more, verify side-load limits to prevent excessive guide wear. Remember the stop screw sets end position and does not lock the load.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X175-100S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-100S FAQ
Yes, the SIJ80X175-100S is discontinued. The exact drop-in replacement is the SAIJ80X175-100S. It shares the same ISO 15552 interface, 80mm bore, 175mm stroke, 100mm adjust window, G3/8 port, and mounting options, but adds an upgraded piston seal.
The 80mm bore provides 2513N push and 2268N pull at 0.5MPa, 3518N push at 0.7MPa, 4523N push at 0.9MPa, and a theoretical max of 513kgf at 1.0MPa. The external stop screw provides a 100mm adjust window, allowing you to trim the extend stroke from the 175mm maximum down to 75mm on-site.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X175-100S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X175-100S replacement — usually within 7-8 hours.