This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X175-75S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X175-75S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 175mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X175-75S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke175 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X175-75S
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S
The AirTAC SIJ80X175-75S is a double-acting single-rod ISO 15552 adjustable-stroke cylinder. A G3/8 port and 25mm rod deliver 2513N push and 2268N pull at 0.5MPa. The external stop screw lets you trim the extend stroke by up to 75mm on-site, giving a usable 100-175mm range. This SIJ is discontinued; the exact drop-in replacement is the SAIJ80X175-75S, sharing the same interface, force, and mounting.
The SAIJ successor upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. Because the stop screw sets end position, it is not a load lock; use an external rod lock for held loads. The -S suffix means a piston magnet is present for legacy CS1-B/DS1-B switches. For sizing, the safe working load is roughly 1508N (60% of the 0.5MPa push), yielding a 128kg vertical lift capacity with a 2:1 margin.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X175-75S |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X175-75S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X175-75S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S Is Used
Press Fit Tuning
Adjust the extend stroke on-site to set precise pressing depths for bearings without re-engineering the fixture.
Variable Transfer Stops
Trim the extend stroke by up to 75mm to accommodate changing package sizes on a sorting line.
Adjustable Sealing Jaws
Fine-tune the jaw closure position for varying pouch thicknesses while maintaining high cycle speeds.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S with the SAIJ80X175-75S
To replace the discontinued SIJ80X175-75S, order the drop-in SAIJ80X175-75S, retaining your FA, LB, or TC ISO 15552 mounts. For force sizing, the 80mm bore yields 2513N push at 0.5MPa; if less force is needed, the 63mm bore offers 1559N, while the 100mm bore provides 3927N. The 75mm adjust window allows precise end-position tuning without machining. The -S magnet supports legacy CS1-B/DS1-B sensors. For strokes over 300mm, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X175-75S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X175-75S FAQ
Yes, the SIJ80X175-75S is discontinued. The exact drop-in replacement is the SAIJ80X175-75S. It shares the same ISO 15552 interface, 80mm bore, 175mm stroke, 75mm adjust window, and G3/8 port, but features an upgraded piston seal.
The 80mm bore provides 2513N push and 2268N pull at 0.5MPa, 3518N push at 0.7MPa, and 4523N push at 0.9MPa. The external stop screw allows you to trim the extend stroke by up to 75mm on-site, yielding a usable range of 100-175mm. The stop sets position but is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X175-75S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X175-75S replacement — usually within 7-8 hours.