This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X200-20 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X200-20 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X200-20, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X200-20
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20
The AirTAC SIJ80X200-20 is a discontinued double-acting single-rod ISO 15552 adjustable-stroke cylinder with a 200 mm nominal stroke and a 20 mm external stop screw window, letting you trim the extend stroke on-site down to 180 mm. Featuring an 80 mm bore, M20x1.5 rod thread, G3/8 port, and 36 mm adjustable air cushions, it delivers 2513 N push and 2268 N pull at 0.5 MPa. The drop-in replacement is the SAIJ80X200-20, matching the interface, force, and mounting.
The SAIJ successor incorporates an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. For sizing, the 2513 N @0.5 MPa push force yields a safe working load of roughly 1508 N, or a 128 kg vertical lift with a 2:1 margin. Note this non-magnetic SKU cannot accept a switch, and the stop screw sets end position only—it is not a load lock; use SAIL or BSAI for held loads.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20 Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X200-20 |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X200-20 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X200-20 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20 Is Used
Press Fit Calibration
Fine-tune the extend stroke by up to 20 mm on-site to dial in exact press-fit depths for bearings without machining custom spacers.
Variable Length Diverter
Adjust the extend stop within the 180-200 mm window to deflect varying package sizes on a conveyor line accurately.
Adjustable End Stop
Set precise end positions for pallet stops, allowing 20 mm of field flexibility to accommodate different pallet footprints.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20 with the SAIJ80X200-20
To replace the discontinued SIJ80X200-20, order the exact drop-in SAIJ80X200-20, keeping the 200 mm nominal stroke and 20 mm adjust window (180-200 mm usable extend). For force sizing, this 80 mm bore yields 2513 N push at 0.5 MPa; if you need less force step down to the 63 mm bore (1559 N push @0.5 MPa), or step up to the 100 mm bore (3927 N push @0.5 MPa) for more thrust. Mounting interfaces (Basic, FA, LB, TC) are fully reusable. This SKU lacks the -S magnet and cannot take a sensor; if position detection is needed, select a -S model. For strokes at or over 300 mm, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X200-20
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X200-20 FAQ
Yes, the SIJ80X200-20 is discontinued. The exact drop-in replacement is the SAIJ80X200-20, offering the same ISO 15552 interface, 80 mm bore, 200 mm stroke, 20 mm adjust window, G3/8 port, and mounting options.
The 80 mm bore provides 2513 N push and 2268 N pull @0.5 MPa, 3518 N @0.7 MPa, and 4523 N @0.9 MPa (513 kgf max). The external stop screw window is 20 mm, allowing the extend stroke to be shortened on-site from 200 mm down to 180 mm.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X200-20
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X200-20 replacement — usually within 7-8 hours.