This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X225-20 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X225-20 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 225mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X225-20, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke225 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X225-20
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20
The AirTAC SIJ80X225-20 is a discontinued double-acting single-rod ISO 15552 adjustable-stroke cylinder with an 80 mm bore and 225 mm maximum stroke. An external stop screw lets you trim the extend stroke by up to 20 mm on-site, giving a usable 205-225 mm window. It delivers 2513 N push and 2268 N pull at 0.5 MPa via a G3/8 port. The drop-in replacement is the SAIJ80X225-20, matching the interface, force, and mounting.
The SAIJ upgrade uses a two Y-shaped one-way piston seal for low start-up pressure and long life. Computed buyer insight: safe working load is ~1508 N (60% of the 2513 N push at 0.5 MPa), yielding a 128 kg vertical lift with a 2:1 margin. The stop screw sets end position but is not a load lock; for held loads use an external rod lock or SAIL/BSAI variant. This non-magnetic SKU cannot take a switch.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20 Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X225-20 |
| Bore size | Ø80 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X225-20 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X225-20 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20 Is Used
Variable Depth Drilling
Adjusts the extend stroke on-site to set precise drilling depths for different material thicknesses without changing tooling.
Variable Length Diverter
Trims the extend position to deflect varying package sizes on a conveyor line, accommodating on-the-fly format changes.
Adjustable Stop Gate
Sets the physical end-stop position for pallets of differing widths, allowing flexible cell reconfiguration.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20 with the SAIJ80X225-20
To replace this discontinued SIJ80X225-20, order the drop-in SAIJ80X225-20. When sizing both ways, the 63 mm neighbor yields 1559 N push at 0.5 MPa, while the 100 mm bore provides 3927 N push. This 80 mm bore delivers 2513 N push at 0.5 MPa and 3518 N at 0.7 MPa. The -20 mm adjust window allows field tuning the extend end position without shims. Mounting reuses ISO 15552 interfaces like FA, LB, or TC. Because this SKU lacks the -S magnet, it cannot accept a sensor; for sensing use legacy CS1-B/DS1-B on a compatible -S model. For strokes >=300 mm, verify side-load guidance to prevent rod binding.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X225-20
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X225-20 FAQ
Yes, the SIJ80X225-20 is discontinued. The exact drop-in replacement is the SAIJ80X225-20, which shares the same ISO 15552 interface, 80 mm bore, 225 mm stroke, G3/8 port, and mounting options.
It provides 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and 4523 N at 0.9 MPa, with a theoretical max of 513 kgf. The external stop screw allows trimming the extend stroke by up to 20 mm on-site (usable 205-225 mm). Note this stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X225-20
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X225-20 replacement — usually within 7-8 hours.