This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X400-10S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X400-10S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 400mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X400-10S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke400 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X400-10S
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S
The AirTAC SIJ80X400-10S is a double-acting single-rod ISO 15552 adjustable-stroke cylinder, now discontinued. Its external stop screw lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 390-400 mm stroke. The 80 mm bore features a Ø25 mm rod, M20x1.5 thread, G3/8 port, and 36 mm adjustable cushions. It delivers 2513 N push and 2268 N pull at 0.5 MPa. The exact drop-in replacement is the SAIJ80X400-10S, sharing the same interface, force, and port.
The SAIJ upgrade uses an upgraded piston seal with two Y-shaped one-way elements for low start-up pressure and long life. Computed buyer insight: safe working load is ~1508 N (60% of push@0.5), giving a ~128 kg vertical lift with a 2:1 margin. The stop sets end position but is NOT a load lock; use SAIL or BSAI for held loads. The -S suffix provides a piston magnet for legacy CS1-B/DS1-B sensors.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X400-10S |
| Bore size | Ø80 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X400-10S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X400-10S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S Is Used
Press Fit Tuning
Trimming the 400 mm extend stroke by up to 10 mm on-site allows precise contact positioning for pressing bearings without machining hard stops.
Divertor Gate Adjustment
Field-tuning the extend end position by 10 mm adapts a diverting gate to varying package sizes on the fly using the G3/8 ported actuator.
Pallet Stop Positioning
The external stop screw provides a 390-400 mm stroke window to fine-tune pallet end-stops, ensuring exact alignment for downstream wrappers.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S with the SAIJ80X400-10S
To replace the discontinued SIJ80X400-10S, use the drop-in SAIJ80X400-10S. If sizing both ways, the neighboring 63 mm bore yields 1559 N push, while the 100 mm bore yields 3927 N push at 0.5 MPa. This 80 mm bore provides 2513 N push, a G3/8 port, and a 10 mm adjust window (usable extend 390-400 mm). Mounting options include FA, LB, and TC. The -S magnet enables position sensing. For the 400 mm stroke, support side-load and rod-bending with external guides to prevent premature wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X400-10S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X400-10S FAQ
Yes, the SIJ80X400-10S is discontinued. The exact drop-in replacement is the SAIJ80X400-10S, which shares the identical ISO 15552 interface, 80 mm bore, 400 mm stroke, 10 mm adjust window, G3/8 port, and mounting options. The SAIJ features an upgraded piston seal for longer life.
The double-acting single-rod cylinder delivers 2513 N push and 2268 N pull @0.5 MPa, 3518 N push @0.7 MPa, and 4523 N push @0.9 MPa (max 513 kgf). The external stop screw provides a 10 mm adjust window (usable extend 390-400 mm). It uses a G3/8 port, runs at 30-800 mm/s, and the stop sets end position but is NOT a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X400-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X400-10S replacement — usually within 7-8 hours.