This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X900-75 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X900-75 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 900mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X900-75, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke900 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X900-75
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75
The AirTAC SIJ80X900-75 is a double-acting single-rod ISO 15552 adjustable-stroke cylinder, now discontinued. Its external stop screw lets you trim the extend stroke by up to 75 mm on-site, giving a usable extend range of 825-900 mm (the 900 mm nominal stroke is the maximum). This 80 mm bore uses a G3/8 port, a Ø25 mm rod with an M20x1.5 thread, and 36 mm adjustable cushions. It delivers 2513 N push and 2268 N pull at 0.5 MPa, reaching 4523 N at 0.9 MPa. The exact drop-in replacement is the SAIJ80X900-75, matching the interface, bore, stroke, force, and mounting.
The SAIJ upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. For sizing, a safe working load is roughly 1508 N (60% of the 0.5 MPa push), equating to a 128 kg vertical lift with a 2:1 margin. This SKU has no -S magnet and cannot take a switch. Note the stop screw sets end position only; it is not a lock, and on air loss the piston drifts. For held loads use an external rod lock or SAIL/BSAI variant.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75 Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X900-75 |
| Bore size | Ø80 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X900-75 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X900-75 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75 Is Used
Sorter Diverter Setup
Tuning the diverter arm reach on-site by up to 75 mm to accommodate varying package widths without changing the entire cylinder mount.
Press Positioning
Adjusting the extend end position in a light assembly press where the working gap requires precise field calibration across a 825-900 mm range.
Pallet Stop Gate
Calibrating a stop gate for different pallet depths, using the external screw to shorten the extend stroke exactly to the required limit.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75 with the SAIJ80X900-75
To replace the discontinued SIJ80X900-75, order the drop-in SAIJ80X900-75, keeping the identical ISO 15552 mounting interface, G3/8 port, and 75 mm adjust window. When sizing both ways, the neighboring 63 mm bore yields 2182 N push at 0.7 MPa, while the 100 mm bore yields 5497 N at 0.7 MPa; this 80 mm bore provides 3518 N at 0.7 MPa. Choose the 75 mm adjust window if your extend stroke needs on-site tuning between 825 and 900 mm. Mounting options include Basic, FA, LB, and TC. Because this SKU lacks the -S magnet, it cannot accept a magnetic switch; confirm sensing needs before ordering. Finally, at a 900 mm stroke, mind the side-load and rod-bending risks—use external guides to support the rod.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X900-75
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X900-75 FAQ
Yes, the SIJ80X900-75 is discontinued. The exact drop-in replacement is the SAIJ80X900-75. It shares the same ISO 15552 interface, 80 mm bore, 900 mm nominal stroke, 75 mm adjust window, G3/8 port, and mounting options, while adding an upgraded two Y-shaped one-way piston seal for lower start-up pressure and longer life.
The 80 mm bore provides 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, 4523 N push at 0.9 MPa, and a 513 kgf max at 1.0 MPa. The external stop screw allows you to trim the extend stroke by up to 75 mm on-site, yielding a usable extend range of 825-900 mm. The stop sets end position only; it is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X900-75
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X900-75 replacement — usually within 7-8 hours.