This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU32X600SH, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU32~50 Standard Cylinder SU32X600SH
The AirTAC SU32~50 Standard Cylinder SU32X600SH is a double-acting profile-type standard cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU32X600SH, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAU32X600SH
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU32~50 Standard Cylinder SU32X600SH
The AirTAC SU32X600SH is a discontinued double-acting profile cylinder with a 32mm bore and 600mm stroke. It delivers 402N push force at 0.5MPa via a 1/8" port, featuring a Viton H seal for 0-150C environments. The direct replacement is the SAU32X600SH, matching the bore, stroke, force, port, and SC-series mounting.
This compact extruded barrel is shorter than same-bore ISO 15552 units. Note the -S magnet used legacy CS1-B/DS1-B switches, whereas the SAU takes CMSG/DMSG/EMSG sensors. Also, SAU adds a SAUF valve-integrated option the SU lacked.
Airtac SU32~50 Standard Cylinder SU32X600SH Technical Specifications
| Model | Airtac SU32~50 Standard Cylinder SU32X600SH |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU32X600SH |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU32X600SH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAU32X600SH produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU32~50 Standard Cylinder SU32X600SH
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU32~50 Standard Cylinder SU32X600SH Is Used
High-Temp Diverting
Actuates routing gates on hot conveyors using the Viton H seal to withstand 150C ambient heat while pushing light packages.
Extended Reach Pushing
Uses the 600mm stroke to transfer small bins between zones, requiring an external guide to prevent rod bending over the long travel.
Pneumatic Locking
Positions lightweight workholding fixtures, needing an external pilot-operated check valve to maintain position if air pressure drops.
Replacing the Airtac SU32~50 Standard Cylinder SU32X600SH with the SAU32X600SH
To replace this SU32X600SH, order the SAU32X600SH. Confirm the 32mm bore, 600mm stroke, 1/8" port, M10x1.25 rod thread, and SC-series mounting. The -H Viton seal provides 0-150C heat resistance. Because the -S magnet is present, prepare to upgrade from CS1-B/DS1-B switches to CMSG/DMSG/EMSG sensors on the SAU. For sizing, a 40mm bore yields 628N push at 0.5MPa if you need more force; if 402N is excessive, investigate smaller alternatives. A 600mm stroke on a 12mm rod risks bending under side loads, so use an external guide. A plain cylinder drifts on air loss; the cushion only decelerates, so add a rod lock for held loads. The SAUF variant offers a built-in valve if needed.
Replacement checklist
- ✓ Same bore / stroke → SAU32X600SH
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU32~50 Standard Cylinder SU32X600SH FAQ
Yes, the SU32X600SH is discontinued. The direct replacement is the SAU32X600SH. It provides identical bore, stroke, force, port, and SC-series mounting, but uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
It features a 1/8" port. Force outputs are 402N push and 345N pull at 0.5MPa, 563N push at 0.7MPa, 724N push at 0.9MPa, and a theoretical max of 82kgf at 1.0MPa.
Related AirTAC SAU Cylinders
Request a Quote for the SAU32X600SH
Send us the quantity and destination. We confirm price, stock and lead time on the SAU32X600SH replacement — usually within 7-8 hours.