This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU50X350H, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU32~50 Standard Cylinder SU50X350H
The AirTAC SU32~50 Standard Cylinder SU50X350H is a double-acting profile-type standard cylinder with a Ø50mm bore and 350mm stroke, 1/4" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU50X350H, which matches its bore, stroke, force and mounting.
- BoreØ50 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAU50X350H
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU32~50 Standard Cylinder SU50X350H
The AirTAC SU50X350H is a discontinued double-acting profile-type cylinder with a 50mm bore, 350mm stroke, and Viton H high-temperature seals rated for 0 to 150 C. It delivers 982 N push force at 0.5 MPa through a 1/4 inch port. AirTAC replaced this end-of-life unit with the SAU50X350H, a direct replacement retaining the exact bore, stroke, force, port, and SC-series mounting footprint.
Because this is a non-magnetic SKU, it cannot accept a sensor. The SAU upgrade introduces the SAUF variant with a built-in 4M solenoid valve, which the SU line lacked. Note that the 350mm stroke requires external guides to prevent rod bending under side loads.
Airtac SU32~50 Standard Cylinder SU50X350H Technical Specifications
| Model | Airtac SU32~50 Standard Cylinder SU50X350H |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU50X350H |
| Bore size | Ø50 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU50X350H carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
The SAU50X350H produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU32~50 Standard Cylinder SU50X350H
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU32~50 Standard Cylinder SU50X350H Is Used
Hot End Ejection
Uses the Viton H high-temperature seals to push parts out of 150 C drying ovens without degrading.
Extended Transfer
Handles 350mm stroke to shift products between parallel conveyor lines, guided externally to prevent rod bending.
Clamping Fixtures
Provides 982 N of push force at 0.5 MPa for securing medium workpieces during machining operations.
Replacing the Airtac SU32~50 Standard Cylinder SU50X350H with the SAU50X350H
To replace this discontinued SU50X350H, order the SAU50X350H direct equivalent, matching the 50mm bore, 350mm stroke, 1/4" port, M16x1.5 rod thread, and SC-series mounting. Confirm your thread standard (PT, G, or NPT) and retain the Viton H seal for 150 C environments. As a non-magnetic SKU, this cylinder cannot support sensing; if you need position detection, switch to an SAU-S model and upgrade to CMSG/DMSG/EMSG switches. For loads requiring holding without live air, add an external rod lock or pilot-operated check valve, as cushions only decelerate. With a 350mm stroke, use external guides to prevent rod bending. If you need more force, the 63mm bore offers 1559 N push at 0.5 MPa; if less is acceptable, the 40mm bore provides 628 N.
Replacement checklist
- ✓ Same bore / stroke → SAU50X350H
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU32~50 Standard Cylinder SU50X350H FAQ
Yes, the SU50X350H is discontinued. The direct replacement is the SAU50X350H, which shares the same 50mm bore, 350mm stroke, output force, 1/4" port, and SC-series mounting.
It delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a theoretical max of 200 kgf at 1.0 MPa. This specific SKU lacks a magnet, so it cannot accept sensors; the SAU-S replacement uses CMSG/DMSG/EMSG switches.
Related AirTAC SAU Cylinders
Request a Quote for the SAU50X350H
Send us the quantity and destination. We confirm price, stock and lead time on the SAU50X350H replacement — usually within 7-8 hours.