This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU100X1300S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU100X1300S
The AirTAC SU63-100 Standard Cylinder SU100X1300S is a double-acting profile-type standard cylinder with a Ø100mm bore and 1300mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU100X1300S, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke1300 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU100X1300S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU100X1300S
The AirTAC SU100X1300S is a discontinued double-acting profile-type cylinder with a 100mm bore and 1300mm stroke. Delivering 3927N push force at 0.5MPa, it features an extruded aluminum barrel and 1/2" port. AirTAC replaced this end-of-line unit with the SAU100X1300S, a direct upgrade retaining the exact body, force, and SC-series mounting.
The SAU replacement modernizes the sensor groove, moving from the legacy CS1-B/DS1-B switches to CMSG/DMSG/EMSG sensors. It also introduces the SAUF built-in 4M valve option absent in the SU line. Note that standard cushions only decelerate; they do not hold loads without air.
Airtac SU63-100 Standard Cylinder SU100X1300S Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU100X1300S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU100X1300S |
| Bore size | Ø100 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU100X1300S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAU100X1300S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU100X1300S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU100X1300S Is Used
Heavy Pallet Transfer
Pushes loaded pallets across extended conveyor lanes, utilizing the 3927N thrust to overcome friction over the 1300mm travel.
Large Door Actuation
Opens and closes heavy industrial machine doors, using adjustable end cushions to decelerate the substantial moving mass safely.
Replacing the Airtac SU63-100 Standard Cylinder SU100X1300S with the SAU100X1300S
To replace this SU100X1300S, order the SAU100X1300S direct equivalent, verifying the 1/2" port, M20x1.5 rod thread, and SC-series mounting. Because this unit has the -S magnet, you must switch to CMSG/DMSG/EMSG sensors as the older CS1-B/DS1-B switches are obsolete. For sizing both ways: a 100mm bore yields 3927N push at 0.5MPa, whereas an 80mm bore provides 2513N. At 1300mm, the Ø25 rod is highly susceptible to side-load bending; always use an external guide to prevent rod damage. A plain cylinder drifts on air loss, so fit an external rod lock for suspended loads. The SAUF variant integrates a valve if you need self-switching.
Replacement checklist
- ✓ Same bore / stroke → SAU100X1300S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU100X1300S FAQ
Yes, the SU100X1300S is discontinued. The direct replacement is the AirTAC SAU100X1300S. It shares the identical 100mm bore, 1300mm stroke, 1/2" port, output force, and SC-series mounting, so it fits the same application. You simply order the SAU equivalent.
At 0.5MPa it provides 3927N push and 3681N pull; at 0.7MPa push is 5497N, and the theoretical max is 801kgf at 1.0MPa. Because this is an -S model, it originally used CS1-B/DS1-B sensors. The SAU replacement requires the newer CMSG/DMSG/EMSG switch family.
Related AirTAC SAU Cylinders
Request a Quote for the SAU100X1300S
Send us the quantity and destination. We confirm price, stock and lead time on the SAU100X1300S replacement — usually within 7-8 hours.