This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU100X600TC, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU100X600TC
The AirTAC SU63-100 Standard Cylinder SU100X600TC is a double-acting profile-type standard cylinder with a Ø100mm bore and 600mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU100X600TC, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke600 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU100X600TC
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU100X600TC
The AirTAC SU100X600TC is a discontinued double-acting profile cylinder with a 100mm bore and 600mm stroke. It delivers 3927 N push and 3681 N pull at 0.5 MPa, scaling to 5497 N at 0.7 MPa. The direct replacement is the SAU100X600TC, matching the 1/2" port, M20x1.5 rod thread, 29mm cushions, and TC mounting without any footprint changes.
This extruded aluminium profile body is shorter than an equivalent ISO 15552 unit while sharing SC-series accessories. Because this SKU lacks a magnet, it cannot accept sensors; the SAU upgrade adds sensing via CMSG/DMSG/EMSG switches and offers a SAUF valve-integrated variant the SU line never had.
Airtac SU63-100 Standard Cylinder SU100X600TC Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU100X600TC |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU100X600TC |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU100X600TC carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAU100X600TC produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU100X600TC
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU100X600TC Is Used
Heavy Press Ejection
Provides the 5497 N push at 0.7 MPa needed to eject dense metal stampings from a hydraulic press bed over the 600mm travel.
Mould Transfer Arms
Shifts heavy injection moulds between stations with a theoretical 801 kgf max force, fitted via the TC mount interface.
Replacing the Airtac SU63-100 Standard Cylinder SU100X600TC with the SAU100X600TC
To replace this discontinued SU100X600TC, order the SAU100X600TC and verify the 1/2" port, M20x1.5 rod thread, and TC mounting accessory are retained for a direct. If moving down to an 80mm bore, note the force drops to 2513 N push at 0.5 MPa; stepping up is unnecessary as 100mm already yields 7068 N at 0.9 MPa. This non-magnetic SKU cannot take a sensor, whereas the SAU replacement uses CMSG/DMSG/EMSG switches. For the 600mm stroke, use an external guide to prevent rod bending under side loads. Finally, the air cushion only decelerates the piston; use an external rod lock or pilot-operated check valve to hold loads vertically.
Replacement checklist
- ✓ Same bore / stroke → SAU100X600TC
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU100X600TC FAQ
Yes, the AirTAC SU100X600TC is discontinued. The direct replacement is the SAU100X600TC, which shares the identical 100mm bore, 600mm stroke, 1/2" port, output force, and TC mounting.
It delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N at 0.7 MPa, and a theoretical max of 801 kgf at 1.0 MPa. This specific SKU has no magnet and cannot take a sensor; the SAU replacement supports CMSG/DMSG/EMSG switches.
Related AirTAC SAU Cylinders
Request a Quote for the SAU100X600TC
Send us the quantity and destination. We confirm price, stock and lead time on the SAU100X600TC replacement — usually within 7-8 hours.