This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU80X200H, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU80X200H
The AirTAC SU63-100 Standard Cylinder SU80X200H is a double-acting profile-type standard cylinder with a Ø80mm bore and 200mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU80X200H, which matches its bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke200 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU80X200H
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU80X200H
The AirTAC SU80X200H is a discontinued double-acting profile-type cylinder featuring an extruded aluminium barrel and a Viton H high-temperature seal rated for 0 to 150 C. Delivering 2513 N of push force at 0.5 MPa through a 25 mm rod, it is replaced by the SAU80X200H.
The SAU80X200H is a direct upgrade retaining the 80 mm bore, 200 mm stroke, 3/8 inch port and SC-series mounting. The upgrade shifts sensing to CMSG/DMSG/EMSG switches and introduces the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU80X200H Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU80X200H |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU80X200H |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU80X200H carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAU80X200H produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU80X200H
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU80X200H Is Used
Hot Stamp Ejection
Ejects formed parts from 150 C stamping dies using the Viton H seal, applying 2513 N of push force at 0.5 MPa to clear heavy blanks reliably.
Pallet Divert Arm
Actuates a 200 mm stroke diverting arm to redirect heavy pallets, reusing existing SC-series mounting brackets for a seamless profile-body retrofit.
Replacing the Airtac SU63-100 Standard Cylinder SU80X200H with the SAU80X200H
To replace this discontinued SU80X200H, order the SAU80X200H direct equivalent, verifying the 3/8 inch port, M20x1.5 rod thread and high-temp Viton H seal. Because this SKU lacks a magnet, it cannot accept a sensor; if sensing is needed, specify an SAU model with the -S option and use CMSG/DMSG/EMSG switches instead of the legacy CS1-B/DS1-B. For sizing, the 80 mm bore yields 2513 N push at 0.5 MPa; if less force is acceptable, a 63 mm bore provides 1559 N. For load holding, note that a plain cylinder drifts on air loss—the cushions only decelerate—so add an external rod lock or pilot-operated check valve. The SAUF variant offers a built-in 4M solenoid valve if compact self-switching is desired.
Replacement checklist
- ✓ Same bore / stroke → SAU80X200H
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU80X200H FAQ
Yes, the SU80X200H is discontinued. The direct replacement is the SAU80X200H, which matches the 80 mm bore, 200 mm stroke, 2513 N force, 3/8 inch port and SC-series mounting.
It delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a theoretical max of 513 kgf at 1.0 MPa. This specific SKU lacks a magnet and cannot take a sensor; the SAU replacement uses CMSG/DMSG/EMSG switches.
Related AirTAC SAU Cylinders
Request a Quote for the SAU80X200H
Send us the quantity and destination. We confirm price, stock and lead time on the SAU80X200H replacement — usually within 7-8 hours.