This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X350-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X350-10S
The AirTAC SUJ Adjustable Cylinder SUJ32X350-10S is a double-acting profile-type standard cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X350-10S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X350-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X350-10S
The AirTAC SUJ32X350-10S is a double-acting double-rod profile cylinder with a 32 mm bore and 350 mm nominal stroke. An external stop screw lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 340-350 mm window.
The direct replacement is the SAUJ32X350-10S, sharing the same force, bore, and FA/LB mounting. The stop screw sets end position but is not a load lock; use an external rod lock for held loads. The SAUJ upgrades sensing from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG switches.
Airtac SUJ Adjustable Cylinder SUJ32X350-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X350-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X350-10S |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X350-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X350-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X350-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X350-10S Is Used
Gripper Jaw Timing
Fine-tune the extend reach by up to 10 mm on-site to perfectly sync gripper jaw closure without machining hard stops.
Transfer Pusher Alignment
Adjust the extend stroke from 340 to 350 mm to match varying product widths on a transfer line, ensuring precise indexing.
Pallet Stop Positioning
Dial in the exact pallet stop location in the field, accommodating frame tolerances without disassembling the cylinder.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X350-10S with the SAUJ32X350-10S
To replace this discontinued cylinder, order the SAUJ32X350-10S. It matches the 32 mm bore, 350 mm stroke, 1/8" port, M10x1.25 rod thread, and 21 mm cushions. The 10 mm adjust window is ideal for precise end-position tuning without shims; note the stop screw sets position but does not lock the load. Because stroke is 350 mm, add external guides to prevent rod bending under side loads. Mounting uses FA or LB brackets (SC-series compatible). The -S suffix means a piston magnet is present; you must upgrade from legacy CS1-B/DS1-B sensors to current CMSG/DMSG/EMSG switches.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X350-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X350-10S FAQ
Yes, the SUJ32X350-10S is discontinued. The direct replacement is the SAUJ32X350-10S, which matches the 32 mm bore, 350 mm stroke, 10 mm adjust window, 1/8" port, and FA/LB mounting. The SAUJ also uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The external stop screw provides a 10 mm trim window, allowing the extend stroke to be shortened from the 350 mm maximum down to 340 mm. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X350-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X350-10S replacement — usually within 7-8 hours.