Airtac 200M Solenoid Valve Base 200M-15F
Genuine AirTAC valve manifold, order code 200M-15F from the 4AM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Manifold200M (for 4A200)
- Stations15 stations
- ThreadPT
- Models100M / 200M / 300M / 400M
- For valves4A100 / 4A200 / 4A300 / 4A400
- Maximum stations16 / 16 / 12 / 8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 200M Solenoid Valve Base 200M-15F
This 200M manifold arranges fifteen 4A200 valves in one bank with a common supply and exhaust, trimming pipe runs and keeping faults easy to trace on the machine. Because the code ends without a G or T letter, the ports are PT thread.
Fifteen stations produce a body length A of 44 mm plus 23 mm for each of the fourteen extra stations, giving 366 mm. The 1/4 inch supply port P serves the whole bank; the fluid is air filtered to 40 um and the temperature range is -20 to +70 C. The order contains the manifold, seals and screws, while stations left open are closed with the separately ordered P-200M-R2 blank plate kit.
Airtac 200M Solenoid Valve Base 200M-15F Technical Specifications
| Order code | 200M-15F |
|---|---|
| Product | Valve Manifold |
| Manifold | 200M (for 4A200) |
| Stations | 15 stations |
| Thread | PT |
| Models | 100M / 200M / 300M / 400M |
|---|---|
| For valves | 4A100 / 4A200 / 4A300 / 4A400 |
| Maximum stations | 16 / 16 / 12 / 8 |
| Supply port P | 1/4" / 1/4" / 3/8" / 1/2" |
| Length A | 100M 38 + 19 × (n-1) mm; 200M 44 + 23 × (n-1) mm; 300M 52 + 28 × (n-1) mm; 400M 61 + 35 × (n-1) mm |
| Fluid | Air, filtered to 40 µm |
| Temperature | -20 to +70 °C |
| Included | Manifold, seals and screws |
| Blank plate | Kit P-□00M-R2 (separate) |
Source: AirTAC 4A manifold datasheet (p.124), ordering code, specifications and dimensions.
How to choose
Choose 200M-15F when fifteen 4A200 valves, or fewer closed with blank plates, share one bank; its neighbours are 200M-14F and the 16-station ceiling code 200M-16F, the last option before the 200M maximum is reached. The 23 mm per-station pitch suits 4A200 bodies; if your valves are 4A300, step to a 300M bank with its 28 mm pitch and 3/8 inch supply port, or to 400M for 4A400 at a 35 mm pitch.
Applications
Machine tool periphery control
Consolidate the valves for clamping, air blow-off and part ejection at fifteen positions behind one 1/4 inch supply port.
Straightener and feeder lines
Coordinate pushers and hold-downs across fifteen stations of a feed line, vented through one shared exhaust.
Small-parts handling cells
Drive fifteen pick-and-place helper cylinders from a single bank that spans 366 mm along the cell frame.
FAQ
What are the key figures of the 200M-15F?
Fifteen stations for 4A200 valves, PT thread (the code carries no G or T), 1/4 inch supply port P, length A of 366 mm (44 mm plus 23 mm per extra station), 16-station maximum for the 200M series, air filtered to 40 um, and -20 to +70 C.
Do I need anything else to complete the bank?
Add one 4A200 valve per active station; the order itself brings the manifold, seals and screws. Any station kept without a valve is closed with the P-200M-R2 blank plate kit ordered separately, and a thread letter G or T only applies if you need non-PT ports.