
The AirTAC 3V-F Base 3V200M6F is a genuine 3V-F manifold base manifold base for 6 stations on one shared air supply. A base is a machined block: it carries no coil and no solenoid, so the valves that sit on it are ordered separately.
The 3V200M6F is a six-station manifold base for AirTAC 3/2 solenoid valves. It is a machined block, not a valve: it carries six valves side by side on one common air supply and one common wiring run, so a multi-point machine can be built from a single feed instead of six individual bodies, each with its own fitting and connection. It has no coil, no voltage and no switching function of its own - the valves that sit on it are ordered separately.
We supply the 3V200M6F as a genuine AirTAC part with PT threads, and we stock the valves and bases of the 3V1x0 / 3V2x0 / 3V3x0 family in both NC and NO states, all five coil voltages and both electrical entries, so one base can serve a mixed panel. Datasheet figures for this family are not published on our pages; send us the RFQ and we will confirm them from the datasheet for you.
| Model | Airtac 3V-F Base 3V200M6F |
|---|---|
| Series | 3V-F manifold base |
| Item form | Manifold base (no coil, no solenoid, no initial state) |
| Stations | 6 |
| Port size | Confirm from the datasheet — ask us |
| Thread | PT |
| Operating pressure | Confirm from the datasheet — ask us |
|---|---|
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
| 3V-F manifold base | Body. |
|---|---|
| 6F | 6 stations in one assembly. |
| PT | Port thread. PT is standard; G and NPT are available to order. |
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Six single-acting swing or edge clamps on a fixture, each switched by its own 3/2 valve seated on one base, fed from a single filter-regulator set.
An operator station with several press, eject and vent functions that used to need six separate bodies and six air connections, now served by one block and one feed.
Six nozzles clearing trays, films or moulded parts along a line, each nozzle triggered by its own valve position on the shared manifold supply.
Pick the base first by station count: the 3V200M6F gives you six valve positions on one shared supply, which suits a machine with six separate single-acting functions - clamp, blow, vent and so on - fed from one air preparation set. If your panel grows later, the same family covers other station counts. The valves are ordered separately, so choose each one for its job: normally closed where the port must stay vented until you energise the coil, normally open where a power loss must leave air flowing. Match every coil to the panel supply, since a solenoid voltage cannot be changed by rewiring, and choose DIN plug or flying-lead entry to suit how your loom is built. Because published flow figures for this family are not in our hands, ask us to check the base's valves against your actuators before you order - and if you want a 3-port valve with full published figures today, the documented 3V2 and 3V3 bodies carry them. If any actuator on the base is double-acting, it needs a 5-port valve from the AirTAC 4V series instead.
Confirm before you order
This page states what the part code proves: six stations, PT threads, and that it is a genuine AirTAC manifold base for 3/2 valves. Pressure, flow and coil figures belong to the valves you mount on it, and for this family we confirm them from the datasheet on request - just include the RFQ. If you need a 3-port valve with published figures right now, our pages for the documented 3V2 and 3V3 bodies carry them.
The 3V200M6F is the manifold block only - no coil, no voltage, no switching - so the six valves are ordered separately; tell us the state, coil voltage and entry you want for each position. Any 3/2 valve mounted here feeds or vents one outlet, so it cannot drive a double-acting cylinder; that job needs a 5-port valve from the AirTAC 4V series.
Genuine AirTAC parts produced by the AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.