
The AirTAC 3V-F Base 3V300M1F is a genuine 3V-F manifold base manifold base for 1 stations on one shared air supply. A base is a machined block: it carries no coil and no solenoid, so the valves that sit on it are ordered separately.
The 3V300M1F gives a single 3/2 solenoid valve a proper seat on a machined manifold block with its own connection to the shared air supply. Even a lone valve benefits from the arrangement: one defined supply point, secure mechanical mounting, and a format that matches the rest of the 3V300M range, which runs from single stations up to twenty.
This is a genuine AirTAC part and the base itself is unpowered: no coil, no voltage, no state. You order the valve separately and choose NC or NO, AC220V, DC24V, AC110V, AC24V or DC12V, and a DIN plug or a flying lead. Any figure you need from the datasheet, we will fetch it for you before you commit.
| Model | Airtac 3V-F Base 3V300M1F |
|---|---|
| Series | 3V-F manifold base |
| Item form | Manifold base (no coil, no solenoid, no initial state) |
| Stations | 1 |
| Port size | Confirm from the datasheet — ask us |
| Thread | PT |
| Operating pressure | Confirm from the datasheet — ask us |
|---|---|
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
| 3V-F manifold base | Body. |
|---|---|
| 1F | 1 stations in one assembly. |
| PT | Port thread. PT is standard; G and NPT are available to order. |
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
One valve position for trialling spring-return cylinders and blow nozzles on a bench before they are fitted to a machine.
A lone 3/2 valve on a compact process skid applies and vents the pilot signal to one larger actuated valve.
A spring-return stopper cylinder on an assembly jig, extended to locate the part and retracted on a single valve command.
With one position, the base decision is simple; the valve decision is where the thinking goes. Normally closed leaves the outlet vented until the coil is energised, which most fail-safe single-acting circuits want; normally open does the opposite. Match the coil to the panel voltage, then pick DIN plug or flying lead to suit the wiring. Because no flow figure for this family is published in our documentation, send the actuator details with your RFQ and we will confirm sizing for you. Buyers who need published flow and coil power straight away should look at the AirTAC 3V2 or 3V3 valve bodies, and anything double-acting should go to the 4V series.
Confirm before you order
For the 3V300M1F itself, the station count is the specification; the valve is a separate order. Pressure, flow and coil-power values for the valve are confirmed from the datasheet on request. Where published figures are needed today, point the enquiry at the AirTAC 3V2 and 3V3 bodies instead.
Normally closed if the outlet must hold no air when the coil is de-energised; normally open if it must stay fed. Whichever you choose, it will drive a single-acting cylinder, a blow point or a pilot line - never a double-acting cylinder, which needs a 5-port valve such as the AirTAC 4V.
Genuine AirTAC parts produced by the AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.