
The AirTAC 3V210-08 Solenoid Valve, 3V200 Series (3V21008NCB-AM) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. Its published figures are confirmed from the AirTAC datasheet on request.
A 3/2 valve has three ports - supply, outlet, exhaust - and two jobs: feed the outlet, or dump it to exhaust. This 3V210 is normally closed, so the outlet stays vented until the DC24V coil is energised; power or air lost, the spring-return actuator connected to it drops to rest. The 1/4in port is the larger of the two common sizes on this body, aimed at bigger single-acting cylinders and longer air lines.
It is a genuine AirTAC part, one option inside a wide family: the same 3/2 bodies are offered normally closed or normally open, with AC220V, DC24V, AC110V, AC24V or DC12V coils, DIN plug or flying-lead entry, and manifold bases for multi-valve stations. Pressure, flow and coil power for this SKU are not on this page - send an RFQ and we will read them off the datasheet for you.
| Model | AirTAC 3V210-08 Solenoid Valve, 3V200 Series (3V21008NCB-AM) |
|---|---|
| Series | 3V210 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
| 3V210 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Energise the coil to push a spring-return clamp closed on a machined workpiece; when the 24V signal drops, the normally closed valve vents the outlet and the spring reopens the clamp.
A short shot of shop air lifts crumbs and film trim off trays between cycles, and the normally closed state guarantees no blow while the line is stopped.
Switch a small pilot feed to a larger process valve from a DC24V PLC panel, with the 1/4in port keeping the pilot line volume short.
This code fixes four choices for you: normally closed (no air at the outlet until the coil is energised), a 1/4in port, a DC24V coil and DIN plug entry. Match the coil to a 24V DC panel supply - a solenoid cannot be rewired for another voltage. If your actuator must move on power loss instead of resting, pick the NO version of the same body; if it needs to be driven both ways, it is double-acting and needs a 5-port AirTAC 4V valve, not this 3/2. PT is the standard thread on this family, with G and NPT available as ordered options. Because published flow figures for this family are not in our hands, send us the cylinder bore and we will check sizing before you order; if you want a fully specified 3-port valve today, the separately documented 3V2 06/08 and 3V3 bodies carry published flow and coil power figures.
Confirm before you order
They are not published on this page, and we will not guess them. Send an RFQ and we read the datasheet values for 3V21008NCB-AM back to you. If you need published numbers in hand before specifying, the separately documented 3V2 06/08 and 3V3 valve pages carry flow and coil power figures.
No. A 3/2 valve has a single outlet, so it can only pressurise or vent one air side - which is exactly right for a spring-return cylinder, a clamp or a blow line. A double-acting cylinder needs both sides switched, and that is the job of a 5-port valve such as the AirTAC 4V series.
Genuine AirTAC parts produced by the AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.