
The AirTAC 4V230P-08B Solenoid Valve, 5/3-way, pressure center, PT1/4, DC24V, terminal entry (4V230P08B) is a genuine 5/3-way 5/3 double solenoid — pressure center solenoid valve with PT1/4 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230P-08B is a 5/3-way double-solenoid directional control valve with a pressure-center spool configuration, part of the popular 4V200 series. When both solenoids are de-energised, the spool shifts to its mid-position and supplies pressure to both cylinder ports (A and B), creating a balanced force that helps resist external movement on a double-acting actuator. This DC24V model uses a 3.0 W coil and comes in a standard terminal-box entry with PT tapered threads on its 1/4-inch supply and cylinder ports.
Built on an aluminium-alloy body with a sliding-column spool design, the 4V230P-08B delivers an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08) and suits double-acting cylinders in the ~32–50 mm bore range. The valve’s internal pilot operates from 0.15–0.8 MPa, with a proof pressure of 1.2 MPa and a fast actuation response of 0.05 seconds or less. IP65-rated protection and class-B insulation make it reliable in general industrial environments, and the manual override allows direct testing during setup.
| Model | AirTAC 4V230P-08B Solenoid Valve, 5/3-way, pressure center, PT1/4, DC24V, terminal entry (4V230P08B) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Pressure center |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure-center spool applies air to both sides of a double-acting cylinder at rest, creating a balanced force ideal for work-holding clamps and light press-fit fixtures where you want to resist drift without full lock-up.
On a conveyor stop or lift-and-locate unit, the 4V230P-08B can pause a cylinder mid-stroke with pressure on both ports, giving a cushioned hold before the next move—useful in packaging and assembly indexing.
Directs air to double-acting actuators on small pneumatic presses and forming tools. The 5/3 pressure-center behaviour helps the tool settle without slamming, and the DC24V coil integrates easily with PLC outputs.
Choose the 4V230P-08B when your application requires a 5/3 pressure-center function—useful for clamping or pressing operations where you want both sides of the cylinder to see pressure at rest, rather than exhausting or blocking. The 4V200 body’s 13.6 mm² effective area (Cv 0.8, catalog figure for the 4V230C-08) is a step up from the smaller 4V100 series (Cv 0.6) and fits mid-sized cylinders well; if you need higher flow for a larger bore or faster cycle, consider moving to the 4V300 body (Cv 1.65).
When replacing an existing valve, match five points: the 4V200 body size, the 5/3 pressure-center function (30P), the 1/4-inch PT port thread, a DC24V coil, and the terminal-box electrical entry. This valve can be used as a single unit or ganged on a manifold base for multi-cylinder stations, and it is not a stand-alone safety device—if you are holding a suspended load, add a pilot-operated check valve at the cylinder ports.
Quick checklist
In the center (de-energised) position, both cylinder ports A and B are connected to supply pressure. This applies air to both sides of a double-acting cylinder simultaneously, creating a balanced force that resists movement. It is different from a closed-center valve (which blocks all ports) or an exhaust-center valve (which vents both ports to atmosphere).
With an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08) and a maximum frequency of 3 cycles per second, this 5/3 valve suits double-acting cylinders in the ~32–50 mm bore range for typical industrial stroke lengths. For very small cylinders (below ~20 mm) a 4V100-series valve may offer finer control, while larger or faster cylinders often benefit from the higher flow of a 4V300-series body.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.