
The AirTAC 4V330E-08B Solenoid Valve, 5/3-way, exhaust center, PT1/4, DC24V, terminal entry (4V330E08B) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/4 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V330E-08B is a 5/3-way double-solenoid pneumatic directional valve that directs compressed air to double-acting cylinders and actuators, with an exhaust center position that vents both cylinder ports to atmosphere when the valve is de-energised. This allows the actuator rod to float freely at mid-stroke—ideal for applications where the load must be moved manually or by an external force without fighting trapped air pressure. Built on the 4V300 aluminium body platform, it delivers an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10) and suits bore sizes in the ~O50-80 mm range.
This specific configuration comes with a DC24V coil drawing just 3.0 W of power and a standard terminal-box electrical entry. The 1/4-inch PT (Rc tapered) ports keep plumbing compact while the spool-and-sleeve design ensures a fast response time of 0.05 seconds or below. With a 450 g mass, IP65 protection, and a maximum cycling rate of 3 cycles per second, the 4V330E-08B is a reliable choice for machine builders who need a centre-exhaust function in a mid-flow valve.
| Model | AirTAC 4V330E-08B Solenoid Valve, 5/3-way, exhaust center, PT1/4, DC24V, terminal entry (4V330E08B) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/4 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
The exhaust-centre function lets a sorting gate drop by gravity as soon as both solenoids are off, without residual air pressure slowing the movement. The 4V300's 3 c/s cycle rate handles moderate-speed diverter lanes reliably.
On a welding or assembly jig where an operator must slide a clamp into position by hand before locking, the 4V330E-08B exhausts both sides of the cylinder at neutral, allowing free manual adjustment of the rod.
In a small press with a double-acting cushion cylinder, the exhaust centre releases trapped air at the end of the stroke, preventing bounce-back and giving a cleaner part release before the next cycle starts.
Choose the 4V330E-08B when your circuit requires a 5/3 exhaust-centre function on a double-acting cylinder up to roughly 80 mm bore. The exhaust centre is the right pick when the load needs to be free-floating at rest—common on manually assisted clamps, gravity-drop gates, or tool-change stations. If you instead need the cylinder to hold position under pressure loss, look at the closed-centre 4V330C variant; for a pressure-centre behaviour, the 4V330P is the correct call.
For smaller cylinders below about 40 mm bore, stepping down to a 4V200-series valve (Cv 1.0) often gives a crisper response and a lighter manifold. For larger bores above 80 mm, the 4V400 body (Cv 2.82) fills the cylinder faster. When matching an existing valve, verify all five points: body size (4V300), function (5/3 exhaust-centre 30E), port size and thread (1/4-inch PT), coil voltage (DC24V), and electrical entry (terminal box). The valve can be used as a single unit or ganged on a common sub-base manifold.
Quick checklist
With an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10), this 5/3 valve is typically a good match for double-acting cylinders with a bore between approximately 50 and 80 mm. The actual speed will depend on your operating pressure, tubing diameter, and stroke length, but the 4V300 body sits in the mid-flow range of the AirTAC 4V series.
Both solenoids de-energise and the spool springs to the centre position, where the pressure port is blocked and both cylinder ports (A and B) are connected to exhaust. This means the cylinder rod is free to move under an external force—it does not hold position. If you require the cylinder to lock in place during a power loss, consider the closed-centre 4V330C model and always add a pilot-operated check valve for true load-holding safety.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.