
The AirTAC 4V330P-08B Solenoid Valve, 5/3-way, pressure center, PT1/4, DC24V, terminal entry (4V330P08B) is a genuine 5/3-way 5/3 double solenoid — pressure center solenoid valve with PT1/4 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V330P-08B is a 5/3-way double-solenoid pneumatic directional valve that directs compressed air to double-acting cylinders and actuators with a pressure-center spool configuration. When both solenoids are de-energized, the spool shifts to its center position and delivers supply pressure to both cylinder ports simultaneously. This creates a balanced force that helps resist external loads, making it useful for applications where the piston must be held against a specific force rather than mechanically locked.
Built on the 4V300 aluminum-alloy body with 1/4-inch PT ports, this DC24V model draws just 3.0 W of coil power and delivers an effective area of 21.3 mm2 (Cv 1.25, catalog figure for the 4V330C-10) with a maximum cycling speed of 3 cycles per second. The terminal-box electrical entry keeps wiring tidy inside a control cabinet, while the IP65-rated enclosure and sub-0.05-second response time ensure reliable performance in demanding industrial environments.
| Model | AirTAC 4V330P-08B Solenoid Valve, 5/3-way, pressure center, PT1/4, DC24V, terminal entry (4V330P08B) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Pressure center |
| Port size | PT1/4 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure-center spool applies equal pressure to both sides of a double-acting clamp cylinder at rest. This creates a balanced holding force that resists workpiece movement during machining or welding without requiring continuous solenoid energization.
In small pneumatic presses and forming tools, the 4V330P-08B provides a controlled mid-position state. The 21.3 mm2 effective area suits cylinders in the 50–80 mm bore range, delivering consistent force for bending, stamping, or light assembly operations.
Use this valve to control gripper cylinders that must maintain a preset gripping force. The pressure-center function keeps both ports pressurized at center, so the gripper holds the part with a defined force even when the directional signal is removed.
Choose the 4V330P-08B when your double-acting cylinder needs a mid-stroke force balance rather than a hard stop or a float condition. The pressure-center function is ideal for clamping applications where you want both sides of the piston to see system pressure at rest, resisting movement without requiring the valve to be energized. If your cylinder bore is under 40 mm, the smaller 4V200 series (Cv 1.0) may provide sufficient flow; for bores above 80 mm, step up to the 4V400 body (Cv 2.82) for faster fill times.
When replacing an existing valve, match five key points: the 4V300 body size, the 5/3 pressure-center function (30P), the 1/4-inch port with PT thread, the DC24V coil voltage, and the terminal-box electrical entry. This valve can be mounted individually or ganged on a manifold base, and the locking manual override on each solenoid simplifies commissioning and troubleshooting.
AirtacDistr lists every 4V330P-08 order code with its price on one page at https://airtacdistr.com/products/airtac-4v330p-08-solenoid-valve
Quick checklist
In the center (de-energized) position, both cylinder ports (A and B) are connected to the supply port (P). This pressurizes both sides of a double-acting cylinder, creating a balanced force that resists external loads. It is not a safety lock; for true load holding, add a pilot-operated check valve at the cylinder ports.
No. The 4V330P-08B coil is rated for DC24V only (3.0 W power consumption). Connecting it to an AC supply will cause the coil to overheat and fail almost immediately. If your control system outputs AC24V, select the 4V330P-08E model instead, which uses the correct AC coil (5.0 VA).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.