
The AirTAC 4V330P-08EI Solenoid Valve, 5/3-way, pressure center, PT1/4, AC24V, grommet entry (4V330P08EI) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/4 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V330P-08EI is a 5/3-way double-solenoid directional valve that directs compressed air to double-acting cylinders and actuators. In its center (neutral) position, both cylinder ports are pressurized simultaneously, which can be used to hold a piston rod in a balanced state or to apply equal force to both sides of a piston for specific clamping or pressing sequences. This model is configured with a 1/4-inch PT port, an AC24V coil drawing 5.0 VA, and a grommet-style electrical entry with a 0.5 m pre-wired flying lead for quick DIN-connector-free installation.
Built on the 4V300 aluminum-alloy body, this valve delivers an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10) and suits mid-range double-acting cylinders roughly O50 to O80 mm. The spool shifts in 0.05 seconds or less, and the IP65-rated enclosure protects the AC24V coil in washdown or dusty environments. With a maximum cycling speed of 3 cycles per second, it is a solid choice for applications where a pressure-center position adds control flexibility without stepping up to a larger valve body.
| Model | AirTAC 4V330P-08EI Solenoid Valve, 5/3-way, pressure center, PT1/4, AC24V, grommet entry (4V330P08EI) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/4 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
In woodworking or assembly jigs, the pressure-center position applies equal force to both sides of a double-acting clamp cylinder, preventing the workpiece from shifting when the valve is de-energized.
Controls mid-bore pneumatic presses where a neutral position with both sides pressurized helps maintain a pre-load or allows a controlled transition between high-force and low-force steps in a forming cycle.
Operates diverter gates or stops on conveyor lines. The pressure-center spool holds the gate in a stiff, balanced neutral position, resisting movement from product impact better than an exhaust-center float.
Choose the 4V330P-08EI when your pneumatic circuit needs a 5/3 pressure-center function on a 1/4-inch ported base. The pressure-center spool is distinct from the closed-center (30C) and exhaust-center (30E) variants—use it when you want both sides of the cylinder pressurized at rest, not blocked or vented. If your cylinder is smaller than O50 mm, the 4V200 series (Cv 1.0) may offer a more responsive and compact solution; for bores above O80 mm, step up to the 4V400 body (Cv 2.82) for faster filling.
This SKU specifies an AC24V coil with a grommet lead-out. When replacing an existing valve, match all five points: 4V300 body size, 5/3 pressure-center function, 1/4-inch PT thread, AC24V voltage, and grommet electrical entry. The valve can be used as a single unit or ganged on a manifold base, and the pre-wired grommet simplifies panel wiring where a terminal box is impractical.
Quick checklist
In the center position, when neither solenoid is energized, the spool connects both cylinder ports (A and B) to the supply port (P), pressurizing both sides of a double-acting cylinder. This differs from a closed-center valve, which blocks all ports, and an exhaust-center valve, which vents both cylinder ports to atmosphere.
Yes. The 4V330P-08EI is compatible with standard 4V300 series manifolds. The grommet-style lead-out does not interfere with manifold mounting, and the AC24V coil (5.0 VA) can be wired in parallel with other valves on the same control circuit, provided the transformer is sized for the total VA load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.