
The AirTAC 4V330P-10E Solenoid Valve, 5/3-way, pressure center, PT3/8, AC24V, terminal entry (4V330P10E) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT3/8 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V330P-10E is a 5/3-way pneumatic solenoid valve that directs compressed air to double-acting cylinders and actuators, with a pressure-center spool configuration. When both solenoids are de-energized, the valve shifts to its center position where both cylinder ports (A and B) are simultaneously pressurized, applying balanced force to hold a load in a specific state without exhausting the circuit.
Built on the 4V300 aluminum-alloy body with 3/8-inch PT ports, this valve provides an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10) and suits cylinders approximately Ø50–80 mm. The AC24V coil draws 5.0 VA, and the spool responds within 0.05 seconds. Weighing 450 g, it features IP65 protection, a locking manual override, and can be mounted on a shared manifold base.
| Model | AirTAC 4V330P-10E Solenoid Valve, 5/3-way, pressure center, PT3/8, AC24V, terminal entry (4V330P10E) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT3/8 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -10 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
In CNC machining and welding jigs, the pressure-center spool applies balanced force to a double-acting clamp cylinder at rest, preventing drift without fully locking the part, which allows for a controlled release sequence.
Used in web-handling and textile machinery where a dancer roller or tensioning cylinder needs a constant, balanced air pressure applied to both sides during idle phases, maintaining material tension without cycling the valve.
Controls double-acting diverters or gates on conveyor lines. The pressure-center position holds the gate in a pre-defined neutral state with air pressure, ready for the next actuation without a sudden drop or movement.
Choose the 4V330P-10E when your application needs a double-acting cylinder to receive balanced pressure at rest—common in circuits where a sudden exhaust or a blocked-center hold is undesirable. The 5/3 pressure-center function is distinct from the closed-center (30C) which blocks all ports, and the exhaust-center (30E) which vents both cylinder lines. For smaller cylinders around Ø20–40 mm, the 4V200 series (Cv 1.0) is a better fit; for larger bores above Ø100 mm, step up to the 4V400 (Cv 2.82).
When replacing an existing valve, match five points: body size (4V300), function (5/3 pressure-center, 30P), port and thread (3/8 PT), coil voltage (AC24V), and electrical entry (terminal box). This model uses a terminal-box connection—if you need a pre-wired lead, select the 'I' grommet variant. Always verify the center-position behavior matches your circuit design before ordering.
AirtacDistr lists every 4V330P-10 order code with its price on one page at https://airtacdistr.com/products/airtac-4v330p-10-solenoid-valve
Quick checklist
In the center (de-energized) position, both cylinder ports (A and B) are connected to the supply port (P), applying pressure to both sides of a double-acting cylinder simultaneously. This creates a balanced force condition, unlike the closed-center (all ports blocked) or exhaust-center (A and B vented) variants.
With a Cv of 1.25 and a 21.3 mm² effective area, this 5/3 valve is well-matched to double-acting cylinders in the Ø50–80 mm range. It provides sufficient flow for smooth, controlled actuation at the valve's maximum cycling speed of 3 cycles per second.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.