Airtac 6HV Manifold Solenoid Valve 6HV0530EM5F050
Genuine AirTAC manifold solenoid valve, order code 6HV0530EM5F050 from the 6HV range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Body and port0500 series, M5
- Function5/3-way exhaust center (30E)
- Voltage and leadDC12V (F), 0.5 m lead
- Function5/2 and 5/3-way manifold solenoid valve
- OperationPilot operated (solenoid)
- 0500 seriesM5 supply and outlets · 3.4 mm² (Cv 0.2), 5/3-way 2.2 mm² (Cv 0.13)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV0530EM5F050
AirTAC built the 6HV0530EM5F050 as a 5/3-way valve with an exhaust center (30E) on the 0500 series body. The M5 supply and outlets carry a 5/3-way flow of 2.2 mm2 (Cv 0.13), and the valve clips onto a DIN rail manifold with common supply and exhaust, so several stations can share one air preparation line. The DC12V coil (voltage code F) draws only 0.7 W, is class F insulated, tolerates plus or minus 10 percent on the supply and switches in 0.05 s or less; the 050 lead runs 0.5 m from the plug-in connector.
AirTAC discontinued the 6HV series in January 2026 and has not named a replacement. Request a quote with this order code and we will confirm whether the valve can still be supplied.
Airtac 6HV Manifold Solenoid Valve 6HV0530EM5F050 Technical Specifications
| Order code | 6HV0530EM5F050 |
|---|---|
| Product | Manifold Solenoid Valve |
| Body and port | 0500 series, M5 |
| Function | 5/3-way exhaust center (30E) |
| Voltage and lead | DC12V (F), 0.5 m lead |
| Function | 5/2 and 5/3-way manifold solenoid valve |
|---|---|
| Operation | Pilot operated (solenoid) |
| 0500 series | M5 supply and outlets · 3.4 mm² (Cv 0.2), 5/3-way 2.2 mm² (Cv 0.13) |
| 100 series | M5 or PT1/8 supply and outlets · 8.9 mm² (Cv 0.52), 5/3-way 8.0 mm² (Cv 0.47) |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi); 5/3-way 0.2 – 0.8 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Max frequency | 5 cycles/s; 5/3-way 3 cycles/s |
| Body | Aluminum alloy |
| Lubrication | Not required |
| Coil voltages | AC220V, AC110V, DC24V, DC12V |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Electrical entry | Plug-in connector |
| Response time | 0.05 s or less |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), specifications and ordering code. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
Within the 5/3-way family, exhaust center 30E sits beside closed center 30C, which blocks all ports in neutral, and pressure center 30P, which keeps the cylinder pressurized; choose 30E when the actuator should vent freely while the valve is unswitched. On voltage, F (DC12V) differs from B (DC24V), A (AC220V) and C (AC110V), so verify the supply really is 12 V DC before ordering. The 050 lead gives 0.5 m; order 6HV0530EM5F200 if the coil cable must reach 2.0 m.
Applications
Miniature indexing stations
Clip the M5 0500 body onto the shared DIN rail of a small indexing or pick-and-place bank, where common supply and exhaust and a 3 cycles/s top frequency cover light-duty motion.
12 V battery-driven rigs
The DC12V coil draws 0.7 W and accepts a plus or minus 10 percent tolerance, so a battery or low-voltage supply in a mobile test cart can switch the valve directly.
Vented neutral fixtures
The 30E exhaust center bleeds the cylinder ports in mid position, which suits clamps or jigs that must relax while the valve sits unenergized between steps.
FAQ
What are the key figures of the 6HV0530EM5F050?
It is a 5/3-way exhaust center (30E) valve on the 0500 series body with M5 ports, 5/3-way flow 2.2 mm2 (Cv 0.13), operating pressure 0.2 to 0.8 MPa, proof pressure 1.2 MPa, temperature -20 to +70 C, max frequency 3 cycles/s, response time 0.05 s or less, DC12V coil at 0.7 W with plus or minus 10 percent tolerance, class F insulation, plug-in entry with a 0.5 m lead, air filtered to 40 um and no lubrication required.
Can the 6HV0530EM5F050 still be ordered?
AirTAC removed the 6HV series from sale in January 2026 and has not named a successor, so availability is not guaranteed. Send a quote request with this exact order code and we will check whether the valve can still be supplied.