Airtac 6HV Manifold Solenoid Valve 6HV100M22F
Genuine AirTAC din rail manifold, order code 6HV100M22F from the 6HVM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Series6HV100M, for 6HV100 valves
- Stations21 to 22 valves (22F)
- Rail length455 mm
- RailStandard DIN rail
- Supply / exhaustPush-in Φ8 (6HV0500M), Φ10 (6HV100M)
- Valve portsM5 (6HV0500), M5 or 1/8" (6HV100)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV100M22F
With 455 mm of standard DIN rail, the AirTAC 6HV100M22F carries 21 to 22 6HV100 valves as a single manifold bank with one shared supply and one shared exhaust. Push-in Dia 10 fittings feed the rail, each valve keeps an M5 or 1/8 inch port, and since 22F sits above 10 stations the set arrives with two supply/exhaust modules at opposite rail ends so pressure stays consistent from the first valve to the last.
AirTAC retired the 6HV series in January 2026 and has not announced a successor. Request a quote with the order code 6HV100M22F and we will confirm whether this rail can still be supplied.
Airtac 6HV Manifold Solenoid Valve 6HV100M22F Technical Specifications
| Order code | 6HV100M22F |
|---|---|
| Product | DIN Rail Manifold |
| Series | 6HV100M, for 6HV100 valves |
| Stations | 21 to 22 valves (22F) |
| Rail length | 455 mm |
| Rail | Standard DIN rail |
|---|---|
| Supply / exhaust | Push-in Φ8 (6HV0500M), Φ10 (6HV100M) |
| Valve ports | M5 (6HV0500), M5 or 1/8" (6HV100) |
| Stations | 2 – 24 |
| Supply modules | One up to 10 stations, two above 10 |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), DIN rail ordering code and dimensions. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
In the 6HV100M ladder, 20F handles 19 to 20 valves and 24F handles 23 to 24; 22F is the code for 21 or 22 valves on its 455 mm rail. Pick 22F when your final count is 21 or 22, which avoids paying for unused seats in 24F; move up to 24F only if expansion to 23 or 24 valves is planned.
Applications
Palletizer valve bank
Twenty-two 6HV100 valves on one 455 mm DIN rail run gripper, clamp and layer-table cylinders on a palletizer, all sharing a Dia 10 push-in supply.
Multi-station assembly fixture
A fixture with clamps at every work position uses the 22F bank so each valve keeps its own M5 or 1/8 inch port while drawing from one common exhaust.
Case erecting and closing line
A case packer needing 21 or 22 valve outputs for flap folding, tucking and ejection consolidates them on a single rail fed from both ends.
FAQ
Which figures matter on the 6HV100M22F?
The 22F station code seats 21 to 22 6HV100 valves on 455 mm of standard DIN rail. Supply and exhaust are Dia 10 push-in, valve ports are M5 or 1/8 inch, and two supply/exhaust modules serve the bank, one at each end, because it exceeds 10 stations.
What is the status of the 6HV100M22F?
The 6HV series is discontinued: AirTAC stopped selling it in January 2026 and has not named a replacement. Request a quote with the order code 6HV100M22F and we will confirm whether this rail can still be supplied.