Airtac 6HV Manifold Solenoid Valve 6HV100M6F
Genuine AirTAC din rail manifold, order code 6HV100M6F from the 6HVM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Series6HV100M, for 6HV100 valves
- Stations5 to 6 valves (6F)
- Rail length175 mm
- RailStandard DIN rail
- Supply / exhaustPush-in Φ8 (6HV0500M), Φ10 (6HV100M)
- Valve portsM5 (6HV0500), M5 or 1/8" (6HV100)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV100M6F
The 6HV100M6F is the mid-size step in the 6HV100M DIN rail table, holding 5 to 6 6HV100 manifold solenoid valves on a 175 mm length of standard DIN rail. Five or six stations remain well inside the 10-station limit, so one supply and exhaust module with one end block serves the whole bank over Dia 10 push-in connections, and each 6HV100 valve ports at M5 or 1/8 inch.
AirTAC discontinued the 6HV series in January 2026 and has not named a replacement. Request a quote with the order code 6HV100M6F and we will confirm whether this rail can still be supplied.
Airtac 6HV Manifold Solenoid Valve 6HV100M6F Technical Specifications
| Order code | 6HV100M6F |
|---|---|
| Product | DIN Rail Manifold |
| Series | 6HV100M, for 6HV100 valves |
| Stations | 5 to 6 valves (6F) |
| Rail length | 175 mm |
| Rail | Standard DIN rail |
|---|---|
| Supply / exhaust | Push-in Φ8 (6HV0500M), Φ10 (6HV100M) |
| Valve ports | M5 (6HV0500), M5 or 1/8" (6HV100) |
| Stations | 2 – 24 |
| Supply modules | One up to 10 stations, two above 10 |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), DIN rail ordering code and dimensions. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
6F sits between 6HV100M4F for 2 to 4 valves and 6HV100M8F for 7 to 8 valves, and it is the first code above the 4-valve minimum of the series. Like every code up to 10F it runs on one supply and exhaust module; from 6HV100M12F (11 to 12 valves) the set adds a second module at the other end of the rail. Remember the series rule too: 6HV100M carries 6HV100 valves, and 6HV0500 valves belong on the 6HV0500M rail.
Applications
Multi-station assembly fixture
Five or six 6HV100 valves clamp, press or eject at separate stations of a small assembly fixture, all fed from one Dia 10 push-in supply module on a 175 mm rail.
Compact filling and capping cell
A handful of M5 or 1/8 inch ported valves on one DIN rail manifold is enough for the cylinder groups of a compact filling, capping or labeling cell.
Warehouse pick station actuators
Pick, push and stopper cylinders at a manual pick station can be driven by a 5 to 6 valve bank that stays within the single supply and exhaust module limit.
FAQ
What are the key figures for the 6HV100M6F?
It carries 5 to 6 6HV100 valves (6F) on a 175 mm standard DIN rail. Supply and exhaust are Dia 10 push-in, valve ports are M5 or 1/8 inch, and as the bank is within 10 stations it uses one supply and exhaust module with one end block.
Is the 6HV series still available from AirTAC?
No. AirTAC discontinued the 6HV series in January 2026 and has not named a replacement series. Send a quote request with the order code 6HV100M6F and we will confirm whether this DIN rail set can still be supplied.