Airtac 6HV Manifold Solenoid Valve 6HV100M8F
Genuine AirTAC din rail manifold, order code 6HV100M8F from the 6HVM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Series6HV100M, for 6HV100 valves
- Stations7 to 8 valves (8F)
- Rail length210 mm
- RailStandard DIN rail
- Supply / exhaustPush-in Φ8 (6HV0500M), Φ10 (6HV100M)
- Valve portsM5 (6HV0500), M5 or 1/8" (6HV100)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV100M8F
AirTAC built the 6HV100M8F rail set to carry 7 to 8 6HV100 manifold solenoid valves on a standard DIN rail of 210 mm. The valves clip onto the rail and share a common supply and exhaust, so the whole bank is fed from one point. Supply and exhaust connections are push-in Dia 10 fittings, and each 6HV100 valve takes an M5 or 1/8" port on the manifold.
AirTAC discontinued the 6HV series in January 2026 and has not named a replacement. Since this bank of 7 or 8 valves stays within the single-module limit, only one supply/exhaust module is needed. Request a quote with the order code 6HV100M8F and we will confirm whether this rail can still be supplied.
Airtac 6HV Manifold Solenoid Valve 6HV100M8F Technical Specifications
| Order code | 6HV100M8F |
|---|---|
| Product | DIN Rail Manifold |
| Series | 6HV100M, for 6HV100 valves |
| Stations | 7 to 8 valves (8F) |
| Rail length | 210 mm |
| Rail | Standard DIN rail |
|---|---|
| Supply / exhaust | Push-in Φ8 (6HV0500M), Φ10 (6HV100M) |
| Valve ports | M5 (6HV0500), M5 or 1/8" (6HV100) |
| Stations | 2 – 24 |
| Supply modules | One up to 10 stations, two above 10 |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), DIN rail ordering code and dimensions. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
The 8F step sits between 6HV100M6F for 5 to 6 valves and 6HV100M10F for 9 to 10 valves, so choose 6HV100M8F when your bank has exactly 7 or 8 valves. All 6HV100M station codes from 4F to 24F share the same Dia 10 push-in supply and exhaust; only the rail length and station range change, and only codes above 10 stations gain a second supply/exhaust module, one at each end. Confirm your valves are 6HV100, because the 6HV0500M rail for 6HV0500 valves uses Dia 8 push-in fittings.
Applications
Conveyor diverting banks
A 7 to 8 valve bank drives the stopper and deflect cylinders along a conveyor line, all fed from one Dia 10 push-in supply point on the shared module.
Pick-and-place stations
Group the 6HV100 valves that switch the gripper and lift actuators of a pick-and-place head onto one 210 mm DIN rail for a compact valve plate.
Packaging machine actuation
Seven or eight 6HV100 valves on a single rail control sealing, cutting and eject cylinders in a packaging machine, wired from one supply and one exhaust.
FAQ
What are the key figures of the 6HV100M8F?
The 8F code covers 7 to 8 valves on a 210 mm standard DIN rail for 6HV100 manifold solenoid valves. Supply and exhaust are push-in Dia 10 fittings, each valve port is M5 or 1/8", and because the bank has 10 stations or fewer it uses one supply/exhaust module with one end block.
Is the 6HV100M8F still available after the 6HV series was discontinued?
AirTAC discontinued the 6HV series in January 2026 and has not named a replacement, so we cannot promise supply here. Send us a quote request with the order code 6HV100M8F and we will confirm whether this rail set can still be supplied.