Airtac 6HV Manifold Solenoid Valve 6HV120M5C050
Genuine AirTAC manifold solenoid valve, order code 6HV120M5C050 from the 6HV range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Body and port100 series, M5
- FunctionDouble solenoid (20)
- Voltage and leadAC110V (C), 0.5 m lead
- Function5/2 and 5/3-way manifold solenoid valve
- OperationPilot operated (solenoid)
- 0500 seriesM5 supply and outlets · 3.4 mm² (Cv 0.2), 5/3-way 2.2 mm² (Cv 0.13)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV120M5C050
The 6HV120M5C050 is the AC110V version of the 100 series, M5-ported double-solenoid valve in AirTAC's 6HV manifold range, a series AirTAC discontinued in January 2026 without naming a successor. As a 5/2-way valve it flows 8.9 mm2 (Cv 0.52) and reacts in 0.05 s or less, cycling up to 5 times per second, and it mounts with its peers on a DIN rail manifold that shares common supply and exhaust.
The C voltage code brings an AC110V coil rated at 1.1 VA with class F insulation and a generous +15% / -10% voltage tolerance, a good match for plants whose control circuits run on 110 V AC rather than 24 V DC. The 050 code fixes the plug-in lead at 0.5 m for short runs to nearby terminals. The valve runs on air filtered to 40 um at 0.15-0.8 MPa (21-114 psi), -20 to +70 C, without lubrication, and the double solenoid design holds its last switched position whenever coil power is removed.
Airtac 6HV Manifold Solenoid Valve 6HV120M5C050 Technical Specifications
| Order code | 6HV120M5C050 |
|---|---|
| Product | Manifold Solenoid Valve |
| Body and port | 100 series, M5 |
| Function | Double solenoid (20) |
| Voltage and lead | AC110V (C), 0.5 m lead |
| Function | 5/2 and 5/3-way manifold solenoid valve |
|---|---|
| Operation | Pilot operated (solenoid) |
| 0500 series | M5 supply and outlets · 3.4 mm² (Cv 0.2), 5/3-way 2.2 mm² (Cv 0.13) |
| 100 series | M5 or PT1/8 supply and outlets · 8.9 mm² (Cv 0.52), 5/3-way 8.0 mm² (Cv 0.47) |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi); 5/3-way 0.2 – 0.8 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Max frequency | 5 cycles/s; 5/3-way 3 cycles/s |
| Body | Aluminum alloy |
| Lubrication | Not required |
| Coil voltages | AC220V, AC110V, DC24V, DC12V |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Electrical entry | Plug-in connector |
| Response time | 0.05 s or less |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), specifications and ordering code. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
Among the 100 series M5 double-solenoid codes, this one differs from 6HV120M5B050 and 6HV120M5B200 only in coil supply: they are DC24V, while 6HV120M5C050 is AC110V with a 0.5 m lead. If your circuit is 24 V DC choose a B code, and for 220 V AC order the A code instead. A spring-return cylinder calls for the single-solenoid 10 code; 5/3-way center behaviors are covered by the 30C, 30E and 30P codes, and 1/8" PT ports by the 06 port code.
Applications
Legacy 110 V AC control panels
The AC110V, 1.1 VA coil connects straight into existing 110 V AC control circuits, so no interposing relay or separate 24 V DC supply is needed to drive this valve.
Assembly fixtures needing memory
With the double-solenoid function, a fixture or press cylinder driven by this valve keeps its position through a power interruption, protecting a partially completed assembly.
Multi-station machine sections
Cv 0.52 flow and 0.05 s response make this M5 body suitable for several small cylinders per section, all served from one DIN rail manifold with common supply and exhaust.
FAQ
What are the key figures of the 6HV120M5C050?
5/2-way double-solenoid manifold valve, 100 series body, M5 ports, 8.9 mm2 (Cv 0.52), max 5 cycles/s, response 0.05 s or less. Coil AC110V, 1.1 VA, class F, plug-in connector, 0.5 m lead, voltage tolerance AC +15% / -10%. Operating pressure 0.15-0.8 MPa (21-114 psi), proof pressure 1.2 MPa (175 psi), -20 to +70 C, 40 um filtered air, no lubrication.
Is the 6HV120M5C050 a current AirTAC product?
No. AirTAC lists the 6HV series as discontinued since January 2026 and has not announced a replacement series. To find out whether this exact valve can still be supplied, send a quote request with the order code 6HV120M5C050; we will confirm directly and make no supply promise beforehand.