Airtac 6HV Manifold Solenoid Valve 6HV130CM5C200
Genuine AirTAC manifold solenoid valve, order code 6HV130CM5C200 from the 6HV range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Body and port100 series, M5
- Function5/3-way closed center (30C)
- Voltage and leadAC110V (C), 2.0 m lead
- Function5/2 and 5/3-way manifold solenoid valve
- OperationPilot operated (solenoid)
- 0500 seriesM5 supply and outlets · 3.4 mm² (Cv 0.2), 5/3-way 2.2 mm² (Cv 0.13)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV130CM5C200
Order 6HV130CM5C200 when the AC110V coil must sit far from the terminal strip: code 200 fits a 2.0 m lead to the plug-in connector. The valve itself is the 100 series 5/3-way manifold unit with M5 ports and a 30C closed center that seals the cylinder ports at neutral, flowing 8.0 mm2 (Cv 0.47) between 0.2 and 0.8 MPa at up to 3 cycles/s.
Like every 6HV valve it clips onto a DIN rail manifold with shared supply and exhaust, vents the pilot exhaust through the R and S ports, and carries a Class F coil that reacts in 0.05 s or less. AirTAC discontinued the 6HV series in January 2026 with no replacement named; ask for a quote with this order code so we can check whether it can still be supplied.
Airtac 6HV Manifold Solenoid Valve 6HV130CM5C200 Technical Specifications
| Order code | 6HV130CM5C200 |
|---|---|
| Product | Manifold Solenoid Valve |
| Body and port | 100 series, M5 |
| Function | 5/3-way closed center (30C) |
| Voltage and lead | AC110V (C), 2.0 m lead |
| Function | 5/2 and 5/3-way manifold solenoid valve |
|---|---|
| Operation | Pilot operated (solenoid) |
| 0500 series | M5 supply and outlets · 3.4 mm² (Cv 0.2), 5/3-way 2.2 mm² (Cv 0.13) |
| 100 series | M5 or PT1/8 supply and outlets · 8.9 mm² (Cv 0.52), 5/3-way 8.0 mm² (Cv 0.47) |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi); 5/3-way 0.2 – 0.8 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Max frequency | 5 cycles/s; 5/3-way 3 cycles/s |
| Body | Aluminum alloy |
| Lubrication | Not required |
| Coil voltages | AC220V, AC110V, DC24V, DC12V |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Electrical entry | Plug-in connector |
| Response time | 0.05 s or less |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), specifications and ordering code. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
This is the long-lead AC110V member of the closed center M5 group: its neighbour 6HV130CM5C050 carries the same valve on a 0.5 m lead, while 6HV130CM5F050 converts the function to DC12V. Measure the distance from the DIN rail manifold to your terminal strip before choosing 050 versus 200, because the plug-in connector sits where the lead ends. If neutral should dump or pressurize the cylinder ports instead of blocking them, move to the 30E or 30P codes.
Applications
Valve island set away from the panel
The 2.0 m lead lets the DIN rail manifold sit beside the machine while the AC110V plug-in connector reaches a remote control cabinet.
Sealing head hold on packaging machines
A closed center parks the sealing or pressing cylinder mid-stroke with its ports blocked, useful where the jaw must wait at a set height between cycles.
Z-axis slide hold on small modules
With M5 ports and 8.0 mm2 flow, the 30C center holds a vertical slide against drift between commanded stops on compact gantries.
FAQ
What are the key figures of the 6HV130CM5C200?
This order code combines the 100 series body with M5 ports, the 30C closed center and an AC110V coil on a 2.0 m lead. Flow is 8.0 mm2 (Cv 0.47) for the 5/3-way version, the pressure range is 0.2 to 0.8 MPa with 1.2 MPa proof pressure, the temperature window is -20 to +70 C, maximum frequency is 3 cycles/s, response is 0.05 s or less, and the plug-in coil draws 1.1 VA.
Can AirTAC still supply the 6HV series?
AirTAC stopped selling the 6HV series in January 2026 and has not named a replacement. Request a quote with the order code 6HV130CM5C200 and we will confirm whether this valve can still be supplied.