Airtac 6HV Manifold Solenoid Valve 6HV130P06A200
Genuine AirTAC manifold solenoid valve, order code 6HV130P06A200 from the 6HV range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Body and port100 series, 1/8" PT
- Function5/3-way pressure center (30P)
- Voltage and leadAC220V (A), 2.0 m lead
- Function5/2 and 5/3-way manifold solenoid valve
- OperationPilot operated (solenoid)
- 0500 seriesM5 supply and outlets · 3.4 mm² (Cv 0.2), 5/3-way 2.2 mm² (Cv 0.13)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV130P06A200
This 6HV130P06A200 is the 100 series 5/3-way code with a pressure center (30P) on 1/8 in PT ports, wired with an AC220V coil (code A) on a 2.0 m lead (code 200). In the neutral position the pressure center keeps both cylinder ports pressurized instead of dumping or blocking them, which is the position to pick when a load must stay held while the solenoid is off. On the 100 series body the 5/3-way version flows 8.0 mm2 (Cv 0.47), switches up to 3 cycles/s and runs from 0.2 to 0.8 MPa on air filtered to 40 um.
The AC220V coil draws 1.1 VA, is Class F insulated in a dust-protected plug-in connector, and its 2.0 m lead lets you place the connection point away from the DIN rail manifold. Note that AirTAC discontinued the 6HV series in January 2026 without naming a replacement, so request a quote with this order code and we will confirm whether it can still be supplied.
Airtac 6HV Manifold Solenoid Valve 6HV130P06A200 Technical Specifications
| Order code | 6HV130P06A200 |
|---|---|
| Product | Manifold Solenoid Valve |
| Body and port | 100 series, 1/8" PT |
| Function | 5/3-way pressure center (30P) |
| Voltage and lead | AC220V (A), 2.0 m lead |
| Function | 5/2 and 5/3-way manifold solenoid valve |
|---|---|
| Operation | Pilot operated (solenoid) |
| 0500 series | M5 supply and outlets · 3.4 mm² (Cv 0.2), 5/3-way 2.2 mm² (Cv 0.13) |
| 100 series | M5 or PT1/8 supply and outlets · 8.9 mm² (Cv 0.52), 5/3-way 8.0 mm² (Cv 0.47) |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi); 5/3-way 0.2 – 0.8 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Max frequency | 5 cycles/s; 5/3-way 3 cycles/s |
| Body | Aluminum alloy |
| Lubrication | Not required |
| Coil voltages | AC220V, AC110V, DC24V, DC12V |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Electrical entry | Plug-in connector |
| Response time | 0.05 s or less |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), specifications and ordering code. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
Pick 30P over its 5/3 siblings 30C (closed center) and 30E (exhaust center) when both cylinder ports must stay pressurized in neutral, and over the 5/2 codes 10 (single solenoid) and 20 (double solenoid) when you need a true mid position. This code fixes AC220V with a 2.0 m lead; the shorter lead lives on 6HV130P06A050, and DC24V, AC110V and DC12V versions are the B, C and F codes such as 6HV130P06B200. For the smaller M5-port 0500 series body, use the 05 series code instead.
Applications
Clamping circuits that hold pressure
The 30P center keeps both ports of a clamping cylinder pressurized when the coil is off, so a fixture does not lose its grip between machine cycles.
Pallet stopper with mid-stroke pause
A stopper cylinder can be parked part-way out with pressure on both sides of the piston and released again the moment the AC220V coil is energized.
Coil wired away from the manifold
The 2.0 m lead reaches a control cabinet that is not next to the DIN rail manifold, with the plug-in Class F connector at the coil end.
FAQ
What are the key figures of the 6HV130P06A200?
100 series manifold solenoid valve, 5/3-way with pressure center (30P), 1/8 in PT supply and outlets, flow 8.0 mm2 (Cv 0.47), operating pressure 0.2 to 0.8 MPa, max 3 cycles/s, response 0.05 s or less, AC220V coil at 1.1 VA, Class F insulation, 2.0 m lead, -20 to +70 C.
The series is discontinued - can I still order this valve?
AirTAC stopped selling the 6HV series in January 2026 and has not named a replacement. Send us a request for quote with the order code 6HV130P06A200 and we will confirm whether this exact valve can still be supplied.