Airtac 6TV Solenoid Valve 6TV21006NCC050
Genuine AirTAC 3/2-way solenoid valve, order code 6TV21006NCC050 from the 6TV range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Body and port200 series, 1/8" PT
- FunctionSingle solenoid, normally closed (10, NC)
- Voltage and leadAC110V (C), 0.5 m lead
- Function3/2-way solenoid valve
- OperationPilot operated (solenoid)
- 0500 seriesM5 supply, outlets and exhausts · 3.4 mm² (Cv 0.2)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6TV Solenoid Valve 6TV21006NCC050
This code builds an AirTAC 6TV 3/2-way single-solenoid valve on the 200 series body with PT1/8 supply and outlets and PT1/8 exhausts, flowing 15.4 mm2 (Cv 0.91) and weighing 90 g. The 10 NC function means the valve is normally closed and only passes air while the coil is energized. It is pilot operated, needs no lubrication, and accepts 0.15 to 0.8 MPa of air filtered to 40 um. AirTAC discontinued the 6TV series in January 2026 and has not named a replacement, so request a quote with this order code and we will confirm whether it can still be supplied.
The C voltage code is the AC110V coil at 1.1 VA, tolerating +15 percent and -10 percent supply variation, in a class F dust-protected plug-in connector with the terminal facing sideways or up. The 050 lead code keeps the lead at 0.5 m, which suits compact manifolds and panels where a long flying lead would only add clutter. Response time is 0.05 s or less, the pilot exhaust is collected and vented through the R port, and the aluminum alloy body pipes directly or mounts on a 6TV manifold base.
Airtac 6TV Solenoid Valve 6TV21006NCC050 Technical Specifications
| Order code | 6TV21006NCC050 |
|---|---|
| Product | 3/2-Way Solenoid Valve |
| Body and port | 200 series, 1/8" PT |
| Function | Single solenoid, normally closed (10, NC) |
| Voltage and lead | AC110V (C), 0.5 m lead |
| Function | 3/2-way solenoid valve |
|---|---|
| Operation | Pilot operated (solenoid) |
| 0500 series | M5 supply, outlets and exhausts · 3.4 mm² (Cv 0.2) |
| 100 series | M5 or PT1/8 supply, outlets and exhausts · 8.9 mm² (Cv 0.52) |
| 200 series | PT1/8 or PT1/4 supply and outlets, PT1/8 exhausts · 15.4 mm² (Cv 0.91) |
| 300 series | PT3/8 supply and outlets, PT1/4 exhausts · 38.4 mm² (Cv 2.26) |
| Weight | 6TV0510 28 g · 6TV0520 43 g · 6TV110 52 g · 6TV120 67 g · 6TV210 90 g · 6TV220 105 g · 6TV310 180 g · 6TV320 215 g |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Max frequency | 5 cycles/s |
| Body | Aluminum alloy |
| Lubrication | Not required |
| Coil voltages | AC220V, AC110V, DC24V, DC12V |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Electrical entry | Plug-in connector |
| Response time | 0.05 s or less |
Source: AirTAC 6TV series datasheet (airtac.com discontinued products), specifications and ordering code. AirTAC lists the 6TV series as discontinued (January 2026).
How to choose
Take this code over 6TV21006NCB200 and 6TV21006NCC200 if your control voltage is AC110V and 0.5 m of lead is enough to reach the connector. If your runs are short but the panel is DC, compare 6TV21006NCB050; if the valve must remember its position without continuous power, the double-solenoid 6TV220 is the sibling to check. For ports above 1/4, the 300 series 6TV310 raises flow to Cv 2.26 on PT3/8.
Applications
Compact manifold banks
The 0.5 m lead and plug-in connector keep wiring tidy when several 200 series valves share a 6TV manifold base inside a small panel.
Fail-closed pneumatic clamping
Because the NC valve closes when the AC110V coil drops out, a clamp circuit stays vented until the controller deliberately energizes it.
Fast cyclic gating
A 0.05 s or better response and 5 cycles/s max frequency fit short-stroke push and eject sequences on PT1/8 air lines at up to 0.8 MPa.
FAQ
What are the key figures of the 6TV21006NCC050?
200 series 3/2-way, single solenoid, normally closed. Ports: PT1/8 supply and outlets, PT1/8 exhausts. Flow 15.4 mm2 (Cv 0.91). Operating pressure 0.15 to 0.8 MPa, proof pressure 1.2 MPa. AC110V coil, 1.1 VA, class F, plug-in connector, 0.5 m lead. Response 0.05 s or less, max frequency 5 cycles/s, weight 90 g, temperature -20 to +70 C, air filtered to 40 um.
Is this valve still available from AirTAC?
The 6TV series was discontinued by AirTAC in January 2026 and no replacement series has been named. Submit a quote request with the order code 6TV21006NCC050 and we will confirm directly whether this valve can still be supplied.