Airtac 7V Solenoid Valve 7V0530CM5A200
Genuine AirTAC solenoid valve, order code 7V0530CM5A200 from the 7V0530C range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- PortM5
- Coil voltageAC220V (A)
- Lead wireLead 2.0 m (200)
- Function5/3-way closed center (double solenoid, all ports blocked in the center position)
- PortsM5, Ø4 mm push-in (J04)
- Effective area2.2 mm² (Cv 0.13) on M5 (catalog value for 7V0530C)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 7V Solenoid Valve 7V0530CM5A200
Built on the 7V0500 body, the AirTAC 7V0530CM5A200 is a 5/3-way closed-center solenoid valve with M5 supply, outlet and exhaust ports. With both coils off the spool centers and blocks every port, holding a cylinder where it is. The catalog flow on M5 is 2.2 mm2 (Cv 0.13). The AC220V coil (code A) draws 1.1 VA, is class F and dust-protected, responds in 0.05 s or less and plugs in horizontally or vertically; the 200 code gives a 2.0 m lead.
It is pilot operated from 0.2 to 0.8 MPa (29-114 psi) on air filtered to 40 um, proof pressure 1.2 MPa, -10 to +50 C, at up to 3 cycles/s, and weighs 50 g. The die-cast aluminum-alloy body collects the pilot exhaust and vents it through the R and S ports. No lubrication is needed; once lubricated air is used, keep using it with ISO VG32 oil.
Airtac 7V Solenoid Valve 7V0530CM5A200 Technical Specifications
| Order code | 7V0530CM5A200 |
|---|---|
| Product | Solenoid Valve |
| Port | M5 |
| Coil voltage | AC220V (A) |
| Lead wire | Lead 2.0 m (200) |
| Function | 5/3-way closed center (double solenoid, all ports blocked in the center position) |
|---|---|
| Ports | M5, Ø4 mm push-in (J04) |
| Effective area | 2.2 mm² (Cv 0.13) on M5 (catalog value for 7V0530C) |
| Weight | 50 g |
| Max frequency | 3 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
| Pilot | Internal |
| Operating pressure | 0.2 – 0.8 MPa (29 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the M5 port.
How to choose
Within the 7V0530C, DC24V, AC110V and DC12V coils replace the A with B/C/F; 7V0530CM5A050 has the 0.5 m lead; the other ports of this body are Dia 4 mm push-in (7V0530CJ04A200). The same body comes as 7V0510, 7V0520, 7V0530E and 7V0530P: 10 single solenoid, 20 double solenoid, 30C/30E/30P the 5/3-way centers. Several 7V0500 valves can share a 7V0500M manifold base of 1 to 20 stations.
Applications
Mid-stroke stop
Both coils off blocks all ports and holds the cylinder where it is.
Machine pneumatics
Cv 0.13 on M5 suits small cylinders and pilot lines in tight spaces.
AC220V control circuits
The AC220V coil connects to a 220 V AC control panel; the 2.0 m lead plugs into the coil terminal.
FAQ
What are the key figures of the 7V0530CM5A200?
5/3-way closed-center solenoid valve, 7V0500 series; M5 ports; catalog flow 2.2 mm2 (Cv 0.13); 0.2-0.8 MPa (29-114 psi), proof 1.2 MPa; -10 to +50 C; up to 3 cycles/s; AC220V coil, 1.1 VA, class F; 2.0 m lead; response 0.05 s or less; 50 g.
What does the 7V0530CM5A200 do with the coils off?
With both coils off the spool centers and blocks every port, holding a cylinder where it is.