Airtac 7V Solenoid Valve 7V0530PJ04C050
Genuine AirTAC solenoid valve, order code 7V0530PJ04C050 from the 7V0530P range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- PortØ4 mm push-in (J04)
- Coil voltageAC110V (C)
- Lead wireLead 0.5 m (050)
- Function5/3-way pressure center (double solenoid, outlets pressurised in the center position)
- PortsM5, Ø4 mm push-in (J04)
- Effective area2.2 mm² (Cv 0.13) on M5 (catalog value for 7V0530C)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 7V Solenoid Valve 7V0530PJ04C050
Weighing 50 g, the AirTAC 7V0530PJ04C050 is a 5/3-way pressure-center solenoid valve with Dia 4 mm push-in A and B ports. With both coils off the spool centers and feeds supply pressure to both outlets. The push-in version has oval bottom ports and is used only on a 7V0500M manifold base, which supplies P and the exhausts. The catalog flow for the 7V0530C on M5 is 2.2 mm2 (Cv 0.13), measured on the threaded version. The AC110V coil (code C) draws 1.1 VA, is class F and dust-protected, responds in 0.05 s or less and plugs in horizontally or vertically; the 050 code gives a 0.5 m lead.
It is pilot operated from 0.2 to 0.8 MPa (29-114 psi) on air filtered to 40 um, proof pressure 1.2 MPa, -10 to +50 C, at up to 3 cycles/s, and weighs 50 g. The die-cast aluminum-alloy body collects the pilot exhaust and vents it through the R and S ports. No lubrication is needed; once lubricated air is used, keep using it with ISO VG32 oil.
Airtac 7V Solenoid Valve 7V0530PJ04C050 Technical Specifications
| Order code | 7V0530PJ04C050 |
|---|---|
| Product | Solenoid Valve |
| Port | Ø4 mm push-in (J04) |
| Coil voltage | AC110V (C) |
| Lead wire | Lead 0.5 m (050) |
| Function | 5/3-way pressure center (double solenoid, outlets pressurised in the center position) |
|---|---|
| Ports | M5, Ø4 mm push-in (J04) |
| Effective area | 2.2 mm² (Cv 0.13) on M5 (catalog value for 7V0530C) |
| Weight | 50 g |
| Max frequency | 3 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
| Pilot | Internal |
| Operating pressure | 0.2 – 0.8 MPa (29 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the M5 port.
How to choose
Within the 7V0530P, AC220V, DC24V and DC12V coils replace the C with A/B/F; 7V0530PJ04C200 has the 2.0 m lead; the other ports of this body are M5 (7V0530PM5C050). The same body comes as 7V0510, 7V0520, 7V0530C and 7V0530E: 10 single solenoid, 20 double solenoid, 30C/30E/30P the 5/3-way centers. Several 7V0500 valves can share a 7V0500M manifold base of 1 to 20 stations.
Applications
Pressure on both sides
Both coils off feeds supply to both outlets of the cylinder.
Manifold valve banks
The Dia 4 mm push-in A and B ports take tubes straight on the valve while the 7V0500M base carries supply and exhaust.
AC110V control circuits
The AC110V coil connects to a 110 V AC control circuit; the 0.5 m lead plugs into the coil terminal.
FAQ
What are the key figures of the 7V0530PJ04C050?
5/3-way pressure-center solenoid valve, 7V0500 series; Dia 4 mm push-in ports; catalog flow 2.2 mm2 (Cv 0.13); 0.2-0.8 MPa (29-114 psi), proof 1.2 MPa; -10 to +50 C; up to 3 cycles/s; AC110V coil, 1.1 VA, class F; 0.5 m lead; response 0.05 s or less; 50 g.
Can the 7V0530PJ04C050 be piped on its own?
No. The push-in version has only the A and B ports on the valve; it mounts on a 7V0500M manifold base, which provides the supply and exhaust.