Airtac 7V Solenoid Valve 7V110J08C050
Genuine AirTAC solenoid valve, order code 7V110J08C050 from the 7V110 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- PortØ8 mm push-in (J08)
- Coil voltageAC110V (C)
- Lead wireLead 0.5 m (050)
- Function5/2-way single solenoid (single solenoid, spring return)
- PortsPT1/8, Ø4 mm push-in (J04), Ø6 mm push-in (J06), Ø8 mm push-in (J08)
- Effective area8.0 mm² (Cv 0.47) on PT1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 7V Solenoid Valve 7V110J08C050
Built on the 7V100 body, the AirTAC 7V110J08C050 is a 5/2-way single-solenoid valve with Dia 8 mm push-in A and B ports. Energizing the coil shifts the spool and a spring returns it when the power is off. The push-in version has oval bottom ports and is used only on a 7V100M manifold base, which supplies P and the exhausts. The catalog flow on PT1/8 is 8.0 mm2 (Cv 0.47), measured on the threaded version. The AC110V coil (code C) draws 1.1 VA, is class F and dust-protected, responds in 0.05 s or less and plugs in horizontally or vertically; the 050 code gives a 0.5 m lead.
It is pilot operated from 0.15 to 0.8 MPa (21-114 psi) on air filtered to 40 um, proof pressure 1.2 MPa, -10 to +50 C, at up to 5 cycles/s, and weighs 80 g. The die-cast aluminum-alloy body collects the pilot exhaust and vents it through the R and S ports. No lubrication is needed; once lubricated air is used, keep using it with ISO VG32 oil.
Airtac 7V Solenoid Valve 7V110J08C050 Technical Specifications
| Order code | 7V110J08C050 |
|---|---|
| Product | Solenoid Valve |
| Port | Ø8 mm push-in (J08) |
| Coil voltage | AC110V (C) |
| Lead wire | Lead 0.5 m (050) |
| Function | 5/2-way single solenoid (single solenoid, spring return) |
|---|---|
| Ports | PT1/8, Ø4 mm push-in (J04), Ø6 mm push-in (J06), Ø8 mm push-in (J08) |
| Effective area | 8.0 mm² (Cv 0.47) on PT1/8 |
| Weight | 80 g |
| Max frequency | 5 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
| Pilot | Internal |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the PT1/8 port.
How to choose
Within the 7V110, AC220V, DC24V and DC12V coils replace the C with A/B/F; 7V110J08C200 has the 2.0 m lead; the other ports of this body are PT1/8 (7V11006C050), Dia 4 mm push-in (7V110J04C050) and Dia 6 mm push-in (7V110J06C050). The same body comes as 7V120, 7V130C, 7V130E and 7V130P: 10 single solenoid, 20 double solenoid, 30C/30E/30P the 5/3-way centers. Several 7V100 valves can share a 7V100M manifold base of 1 to 20 stations.
Applications
Spring-return cylinder control
A 110 V AC control circuit switches a double-acting cylinder; with the coil off the spring returns it to the start position.
Manifold valve banks
The Dia 8 mm push-in A and B ports take tubes straight on the valve while the 7V100M base carries supply and exhaust.
AC110V control circuits
The AC110V coil connects to a 110 V AC control circuit; the 0.5 m lead plugs into the coil terminal.
FAQ
What are the key figures of the 7V110J08C050?
5/2-way single-solenoid valve, 7V100 series; Dia 8 mm push-in ports; catalog flow 8.0 mm2 (Cv 0.47); 0.15-0.8 MPa (21-114 psi), proof 1.2 MPa; -10 to +50 C; up to 5 cycles/s; AC110V coil, 1.1 VA, class F; 0.5 m lead; response 0.05 s or less; 80 g.
Can the 7V110J08C050 be piped on its own?
No. The push-in version has only the A and B ports on the valve; it mounts on a 7V100M manifold base, which provides the supply and exhaust.