Airtac 7V Solenoid Valve 7V130P06B200
Genuine AirTAC solenoid valve, order code 7V130P06B200 from the 7V130P range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- PortPT1/8
- Coil voltageDC24V (B)
- Lead wireLead 2.0 m (200)
- Function5/3-way pressure center (double solenoid, outlets pressurised in the center position)
- PortsPT1/8, Ø4 mm push-in (J04), Ø6 mm push-in (J06), Ø8 mm push-in (J08)
- Effective area7.0 mm² (Cv 0.41) on PT1/8 (catalog value for 7V130C)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 7V Solenoid Valve 7V130P06B200
With a DC24V coil and a 2.0 m lead, the AirTAC 7V130P06B200 is a 5/3-way pressure-center solenoid valve with PT1/8 supply, outlet and exhaust ports. With both coils off the spool centers and feeds supply pressure to both outlets. The catalog flow for the 7V130C on PT1/8 is 7.0 mm2 (Cv 0.41). The DC24V coil (code B) draws 0.7 W, is class F and dust-protected, responds in 0.05 s or less and plugs in horizontally or vertically; the 200 code gives a 2.0 m lead.
It is pilot operated from 0.2 to 0.8 MPa (29-114 psi) on air filtered to 40 um, proof pressure 1.2 MPa, -10 to +50 C, at up to 3 cycles/s, and weighs 100 g. The die-cast aluminum-alloy body collects the pilot exhaust and vents it through the R and S ports. No lubrication is needed; once lubricated air is used, keep using it with ISO VG32 oil.
Airtac 7V Solenoid Valve 7V130P06B200 Technical Specifications
| Order code | 7V130P06B200 |
|---|---|
| Product | Solenoid Valve |
| Port | PT1/8 |
| Coil voltage | DC24V (B) |
| Lead wire | Lead 2.0 m (200) |
| Function | 5/3-way pressure center (double solenoid, outlets pressurised in the center position) |
|---|---|
| Ports | PT1/8, Ø4 mm push-in (J04), Ø6 mm push-in (J06), Ø8 mm push-in (J08) |
| Effective area | 7.0 mm² (Cv 0.41) on PT1/8 (catalog value for 7V130C) |
| Weight | 100 g |
| Max frequency | 3 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
| Pilot | Internal |
| Operating pressure | 0.2 – 0.8 MPa (29 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the PT1/8 port.
How to choose
Within the 7V130P, AC220V, AC110V and DC12V coils replace the B with A/C/F; 7V130P06B050 has the 0.5 m lead; the other ports of this body are Dia 4 mm push-in (7V130PJ04B200), Dia 6 mm push-in (7V130PJ06B200) and Dia 8 mm push-in (7V130PJ08B200). The same body comes as 7V110, 7V120, 7V130C and 7V130E: 10 single solenoid, 20 double solenoid, 30C/30E/30P the 5/3-way centers. PT threads are standard; G (BSPP) and NPT are marked G and T at the end of the code. Several 7V100 valves can share a 7V100M manifold base of 1 to 20 stations.
Applications
Pressure on both sides
Both coils off feeds supply to both outlets of the cylinder.
Machine pneumatics
Cv 0.41 on PT1/8 suits small and medium cylinders.
DC24V control circuits
The DC24V coil connects to a 24 V DC PLC output; the 2.0 m lead plugs into the coil terminal.
FAQ
What are the key figures of the 7V130P06B200?
5/3-way pressure-center solenoid valve, 7V100 series; PT1/8 ports; catalog flow 7.0 mm2 (Cv 0.41); 0.2-0.8 MPa (29-114 psi), proof 1.2 MPa; -10 to +50 C; up to 3 cycles/s; DC24V coil, 0.7 W, class F; 2.0 m lead; response 0.05 s or less; 100 g.
What does the 7V130P06B200 do with the coils off?
With both coils off the spool centers and feeds supply pressure to both outlets.