Airtac 7V Solenoid Valve 7V230CJ08F050
Genuine AirTAC solenoid valve, order code 7V230CJ08F050 from the 7V230C range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- PortØ8 mm push-in (J08)
- Coil voltageDC12V (F)
- Lead wireLead 0.5 m (050)
- Function5/3-way closed center (double solenoid, all ports blocked in the center position)
- PortsPT1/4, Ø8 mm push-in (J08), Ø10 mm push-in (J10)
- Exhaust portsPT1/8 on the PT1/4 version
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 7V Solenoid Valve 7V230CJ08F050
Built on the 7V200 body, the AirTAC 7V230CJ08F050 is a 5/3-way closed-center solenoid valve with Dia 8 mm push-in A and B ports. With both coils off the spool centers and blocks every port, holding a cylinder where it is. The push-in version has oval bottom ports and is used only on a 7V200M manifold base, which supplies P and the exhausts. The catalog flow on PT1/4 is 10.8 mm2 (Cv 0.64), measured on the threaded version. The DC12V coil (code F) draws 0.7 W, is class F and dust-protected, responds in 0.05 s or less and plugs in horizontally or vertically; the 050 code gives a 0.5 m lead.
It is pilot operated from 0.2 to 0.8 MPa (29-114 psi) on air filtered to 40 um, proof pressure 1.2 MPa, -10 to +50 C, at up to 3 cycles/s, and weighs 145 g. The die-cast aluminum-alloy body collects the pilot exhaust and vents it through the R and S ports. No lubrication is needed; once lubricated air is used, keep using it with ISO VG32 oil.
Airtac 7V Solenoid Valve 7V230CJ08F050 Technical Specifications
| Order code | 7V230CJ08F050 |
|---|---|
| Product | Solenoid Valve |
| Port | Ø8 mm push-in (J08) |
| Coil voltage | DC12V (F) |
| Lead wire | Lead 0.5 m (050) |
| Function | 5/3-way closed center (double solenoid, all ports blocked in the center position) |
|---|---|
| Ports | PT1/4, Ø8 mm push-in (J08), Ø10 mm push-in (J10) |
| Exhaust ports | PT1/8 on the PT1/4 version |
| Effective area | 10.8 mm² (Cv 0.64) on PT1/4 (catalog value for 7V230C) |
| Weight | 145 g |
| Max frequency | 3 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
| Pilot | Internal |
| Operating pressure | 0.2 – 0.8 MPa (29 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the PT1/4 port.
How to choose
Within the 7V230C, AC220V, DC24V and AC110V coils replace the F with A/B/C; 7V230CJ08F200 has the 2.0 m lead; the other ports of this body are PT1/4 (7V230C08F050) and Dia 10 mm push-in (7V230CJ10F050). The same body comes as 7V210, 7V220, 7V230E and 7V230P: 10 single solenoid, 20 double solenoid, 30C/30E/30P the 5/3-way centers. Several 7V200 valves can share a 7V200M manifold base of 1 to 20 stations.
Applications
Mid-stroke stop
Both coils off blocks all ports and holds the cylinder where it is.
Manifold valve banks
The Dia 8 mm push-in A and B ports take tubes straight on the valve while the 7V200M base carries supply and exhaust.
DC12V control circuits
The DC12V coil connects to a 12 V DC supply; the 0.5 m lead plugs into the coil terminal.
FAQ
What are the key figures of the 7V230CJ08F050?
5/3-way closed-center solenoid valve, 7V200 series; Dia 8 mm push-in ports; catalog flow 10.8 mm2 (Cv 0.64); 0.2-0.8 MPa (29-114 psi), proof 1.2 MPa; -10 to +50 C; up to 3 cycles/s; DC12V coil, 0.7 W, class F; 0.5 m lead; response 0.05 s or less; 145 g.
Can the 7V230CJ08F050 be piped on its own?
No. The push-in version has only the A and B ports on the valve; it mounts on a 7V200M manifold base, which provides the supply and exhaust.