The AirTAC ACE ISO 21287 Compact Cylinders ACE40X10SG is a genuine double acting ISO 21287 compact air cylinder with a Ø40mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting compact cylinder in the ISO 21287 family, the ACE40X10SG pairs a 40 mm bore with a short 10 mm stroke inside a hard-anodized aluminium body fitted with an S45C hard-chrome plated rod. Air both extends and retracts the rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. At 0.5 MPa it pushes 628.3 N and pulls 571.8 N; at 0.7 MPa those figures climb to 879.6 N and 800.5 N, with a theoretical maximum of 128.1 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight jigs, guards and gantries where a full-length cylinder will not fit.
The S in the model code means the optional -S magnet is fitted on this unit, so CMSE or DMSE reed and solid-state switches can be seated in the body slots for end-of-stroke feedback. The rod ends in a female M8x1.25 thread, air enters through 1/8" G ports, operating pressure spans 0.15-1.0 MPa (22-145 psi), and speed runs 30-500 mm/s.
| Model | Airtac ACE ISO 21287 Compact Cylinders ACE40X10SG |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 572 N |
| 0.7 MPa | 880 N | 800 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamping a machined aluminium housing on a CNC fixture: the 10 mm stroke grips and releases fast, and 628.3 N of push at 0.5 MPa holds the part firmly against cutting loads.
Kicking off-spec cartons off a packaging conveyor: the compact body fits beside the belt frame, and the fitted magnet with a CMSE switch confirms every reject stroke.
Staking terminals on an electronics assembly bench: about 377 N of usable force at 0.5 MPa handles light forming, and the short body slides inside a bench-top press frame.
For lighter clamping, the ACE32X10 delivers 402.1 N push at 0.5 MPa; if the job needs more muscle, step up to the ACE50X10 at 981.7 N. Remember that a plain ACE does not hold position when air is lost - the piston drifts - so add a rod lock or pilot check valve wherever the load must stay put. FA/FB flanges, LB feet, CA/CB clevises, CR, SDB pivot and FTC brackets bolt straight to the ISO 21287 face, and I or Y rod knuckles suit gripping tooling. The fitted -S magnet pairs directly with CMSE / DMSE switches for position sensing.
AirtacDistr lists every ACE40 order code with its price on one page at https://airtacdistr.com/products/airtac-ace40-compact-air-cylinder
Quick checklist
At 0.5 MPa the 40 mm bore pushes 628.3 N and pulls 571.8 N. At 0.7 MPa it pushes 879.6 N and pulls 800.5 N, and the theoretical maximum is 128.1 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), speed runs 30-500 mm/s, and air supply enters through 1/8" G ports.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke energy but never locks the load - use a rod lock or pilot check valve when position must be held. FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC mounts, plus I/Y knuckles, bolt to the standard face. The -S magnet is fitted on this model, so CMSE / DMSE switches can be added straight into the body slots.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.