
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X30-10SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X30-10SB is a double acting AirTAC compact cylinder to ISO 21287, with a 20 mm bore, 30 mm stroke and a male rod thread on the 10 mm rod. An external stop screw trims the extend stroke anywhere within the ordered 10 mm window, giving a usable range of 20-30 mm without changing the air supply. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N, rising to 219.9 N on the extend stroke at 0.7 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding where a full-length body will not fit.
Because the body is hard-anodized aluminium with an S45C hard-chrome plated rod, it survives abrasive shop air and repeated cycling. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped on for end-of-stroke signalling. Speed range is 30-500 mm/s across 0.15-1.0 MPa (22-145 psi) of clean, 40 um filtered air.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X30-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body fits inside CNC jig walls, and the male rod thread takes a custom clamp tip for holding brackets during drilling.
The fitted magnet drives CMSE or DMSE switches to confirm each 20-30 mm push of a divert arm on a carton sorting conveyor.
If the load must stay put during a pause, remember the stop screw is a mechanical end stop only - on air loss the piston drifts, so add a locking solution elsewhere. The male rod thread suits direct attachment to tooling plates, and FA flange or LB foot mounts bolt to the standard ISO 21287 face.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa push is 219.9 N and pull 164.9 N; theoretical maximum is 32 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, and the port is 1/8". The extend stroke is adjustable from 20 to 30 mm via the external stop screw within the 10 mm window.
The hard-anodized aluminium body follows ISO 21287, saving about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke impact. The stop screw shortens the extend stroke by up to 10 mm on site; it is an end stop, not a mid-stroke lock. This model carries the optional -S magnet, so CMSE / DMSE switches can be mounted, and FA flange or LB foot mounts fit the standard face.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.