
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X30-20SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting compact actuator built to ISO 21287, the ACEJ20X30-20SB pairs a 20 mm bore with a 30 mm stroke and an external stop screw that trims the extend stroke anywhere within the ordered 20 mm window, giving a usable range of 10-30 mm. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa those rise to 219.9 N and 164.9 N, with a theoretical ceiling of 32 kgf at 1.0 MPa. The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding.
The male rod thread (B code) and the fitted -S magnet make this variant direct ready for switched positioning: CMSE or DMSE reed and solid-state switches mount directly in the body slots. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the S45C hard-chrome plated 10 mm rod keeps wear low. Operating range is 0.15-1.0 MPa (22-145 psi) at speeds of 30-500 mm/s.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X30-20SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 10-30 mm adjustable extend range matches short clamp strokes on machining jigs, and the compact body fits where a full-length profile cylinder would foul the fixture.
The male rod thread and about 8 kg vertical-lift equivalent suit capping or pressing of vials and sample trays in compact analytical equipment.
The stop screw only shortens the extend stroke and acts as an end stop, not a mid-stroke lock, so the piston can drift if air is lost - add a valve or external stop for load holding. FA flange and LB foot mountings bolt to the ISO 21287 face, and the -S magnet in this model lets CMSE / DMSE switches report end positions without extra brackets.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa it pushes 219.9 N and pulls 164.9 N, with a theoretical maximum of 32 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 30 mm extend stroke by up to 20 mm, so the working range is 10-30 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke impact. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots for position feedback. FA flange and LB foot mountings plus I and Y rod knuckles bolt straight to the standard face; the B code gives a male rod thread and the port is 1/8".
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.