
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X30-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X30-30B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 30 mm stroke anywhere within a 30 mm window, giving a usable 0-30 mm range set on site with a screwdriver. At 0.5 MPa the 20 mm bore pushes 157.1 N and pulls 117.8 N, a light-to-medium class suited to small clamping and positioning heads. The B code gives a male rod thread on the 10 mm rod, and the PT ports are 1/8".
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into slim fixtures and guarded cells. A fixed TPU bumper at each end absorbs end-of-stroke impact, and the optional -S magnet (not fitted on this code) enables CMSE / DMSE switches.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X30-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamps thin-walled machined parts in second-operation jigs; the short body fits under the jig plate where a full-length profile cylinder would not, and the male rod thread suits knuckle levers.
Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve if the load must stay put. FA flange or LB foot mountings bolt to the ISO 21287 face, and if position feedback is needed order the -S magnet version for CMSE / DMSE switches.
Quick checklist
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa push is 219.9 N and pull 164.9 N, with a theoretical maximum of 32 kgf at 1.0 MPa. It is double acting with a 30 mm stroke adjustable down to 0 mm via the stop screw, runs at 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, and withstands 1.5 MPa (215 psi) proof pressure from -20 to +70 C.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 10 mm rod and threaded covers, about 50% shorter in mounting length than an ISO 15552 profile cylinder. A fixed TPU bumper at both ends absorbs end-of-stroke impact. This code has no magnet, so no switch can be read; order the optional -S magnet version to run CMSE or DMSE switches, and mount via FA flange or LB foot.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.