verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B

The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ20 mm
  • Stroke35 mm
  • Port size1/8"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM6×1.0
  • CushionFixed TPU bumper (both ends)
$39.08 $45.41Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ20 stroke, adjustment, mounting and version on one page All ACEJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B

Double acting and stroke-trimmable, the ACEJ20X35-10B is a genuine AirTAC ISO 21287 compact cylinder with a 20 mm bore and 35 mm stroke. An external stop screw shortens the extend stroke by up to 10 mm on site, so the working range is 25-35 mm without swapping the cylinder.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit. A hard-anodized aluminium body, S45C hard-chrome plated rod and fixed TPU bumpers at both ends round out the build. Note: no magnet is fitted on this version, so position switches cannot be used unless you order the optional -S code.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B Technical Specifications

ModelAirtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ20 mm
Stroke35 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/8"
Rod threadM6×1.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø20mm)

PressureForce (both ways)
0.5 MPa118 N
0.7 MPa165 N
Max (@1.0 MPa)24 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B

ACEJISO 21287 compact cylinder (adjustable-stroke).
20Bore size in mm.
×35Stroke length in mm.
-10Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B Is Used

precision_manufacturing

Fixture clamp trimming

The 10 mm stop screw lets a jig builder dial the 35 mm extend stroke down to 25 mm to match a 94 N clamping requirement on small aluminium brackets without changing hardware.

Is the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B the Right Cylinder?

The male rod thread (B code) mates directly with I or Y rod knuckles, and FA flange or LB foot mounts bolt to the standard ISO 21287 face. Remember the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it is not a mid-stroke lock. If you need switch feedback, order the -S variant with CMSE / DMSE sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B FAQ

Push is 157.1 N and pull 117.8 N at 0.5 MPa; at 0.7 MPa push is 219.9 N and pull 164.9 N; theoretical maximum is 32 kgf at 1.0 MPa. It is double acting with a 10 mm adjustable extend window (25-35 mm usable), runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/8" port and male rod thread.

The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA flange, LB foot or FTC brackets bolt straight to its standard face. Sensing is not included on this model: the magnet is the optional -S code, and only with -S can CMSE / DMSE switches be mounted. A fixed TPU bumper at each end absorbs end-of-stroke energy.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ20X35-10B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.