
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X35-10SB is a double acting AirTAC compact cylinder built to ISO 21287, with a 20 mm bore and a 35 mm stroke that an external stop screw can trim anywhere in a 10 mm window, giving a usable extend range of 25-35 mm. The male rod thread (B code) suits inline tooling, and the fitted -S magnet lets CMSE / DMSE switches report end positions.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures where a full-length body will not fit. A hard-anodized aluminium body carries an S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke shock at both ends, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamps fixture plates on a CNC jig with about 94 N of usable force at 0.5 MPa; the stop screw trims the extend stroke between 25 and 35 mm to match part height.
Pushes finished parts off a small assembly station; the fitted -S magnet drives CMSE or DMSE switches so the PLC confirms the trimmed end position.
Size this bore when your load sits near 94 N at 0.5 MPa. Remember the stop screw is a mechanical end stop only - on air loss the piston drifts, so add a valve or external stop if the position must hold.
Mount with FA flange or LB foot brackets on the ISO 21287 face, add I or Y rod knuckles for side misalignment, and keep the -S magnet in mind if position sensing may be added later - this model already carries it.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
It is double acting with a 10 mm adjustable window on the 35 mm stroke (usable 25-35 mm), 1/8" ports, male rod thread, PT air ports, speed 30-500 mm/s, operating pressure 0.15-1.0 MPa (22-145 psi) and proof pressure 1.5 MPa (215 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. FA flange, LB foot, FTC brackets and I/Y rod knuckles bolt to the standard face. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clamped straight onto the body slots.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.