
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X35-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X35-20B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Air drives the rod out and pulls it back, and an external stop screw trims the 35 mm stroke by up to 20 mm on site, giving a usable range of 15-35 mm without changing the cylinder.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding where a full-length body will not fit. The hard-anodized aluminium body carries an S45C hard-chrome plated 10 mm rod, and fixed TPU bumpers absorb end-of-stroke shock at both ends. The rod end is male thread (B code) and the port is 1/8".
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 15-35 mm adjustable range lets a machinist dial in the exact clamp throw for aluminium brackets, using about 94 N of usable force at 0.5 MPa.
Pushes light plastic housings off a nest with 157.1 N at 0.5 MPa; the male rod thread (B) accepts a custom tip directly.
The short body fits inside guarding where an ISO 15552 profile cylinder is too long; order the -S code if CMSE / DMSE switch feedback is needed later.
Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - on air loss the piston still drifts, so add a separate valve or lock for load holding. Mounting: FA flange or LB foot brackets bolt to the ISO 21287 face, with I and Y rod knuckles available. If you need position sensing, order the -S version; this model has no magnet, so CMSE / DMSE switches cannot be fitted.
Quick checklist
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa it pushes 219.9 N and pulls 164.9 N; the theoretical maximum is 32 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 35 mm extend stroke by up to 20 mm, so the working range is 15-35 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. FA flange and LB foot brackets plus I/Y rod knuckles bolt straight to the standard face, and the rod end is male thread. Fixed TPU bumpers at both ends absorb end-of-stroke energy. Position sensing requires the optional -S magnet with CMSE / DMSE switches; this model (no S code) has no magnet, so no switch can be mounted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.