
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X35-30SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X35-30SB is a double acting ISO 21287 compact cylinder with a 20 mm bore and a 35 mm stroke that an external stop screw trims anywhere in a 30 mm window, giving a usable extend range of 5-35 mm. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N, rising to 219.9 N at 0.7 MPa. Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight pick-and-place heads and small fixtures where a full-length body cannot fit.
The male rod thread (B code) suits external rod couplings, and the fitted -S magnet lets CMSE or DMSE switches report end positions. The hard-anodized aluminium body carries a hard-chrome plated S45C rod, with a fixed TPU bumper at each end and a speed range of 30-500 mm/s.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X35-30SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body halves the mounting length versus an ISO 15552 profile cylinder, and the fitted magnet with CMSE switches confirms grip height on each cycle of a PCB tray handler.
A usable working force near 94 N clamps connector housings during functional testing; the stop screw sets the exact clamp position per fixture and the TPU bumper quiets each end of stroke.
The 35 mm stroke is well inside the 100 mm maximum standard stroke for this bore, so no made-to-order stroke is needed. The 30 mm adjustment window means one cylinder can cover several station depths; note the stop screw only shortens the extend stroke and drifts on air loss, so it is not a load lock. FA flange or LB foot mountings bolt to the ISO 21287 face, and the -S magnet is already fitted for CMSE / DMSE switch mounting.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa push is 219.9 N and pull 164.9 N; theoretical maximum is 32 kgf at 1.0 MPa. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, with a 20 mm bore, 35 mm stroke adjustable down to 5 mm, a 10 mm rod with male thread and a 1/8" port.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow jigs and gantry heads. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots to signal extend and retract positions. FA flange and LB foot mountings plus I/Y rod knuckles bolt to the standard face, and a fixed TPU bumper at each end absorbs end-of-stroke impact.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.