verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB

The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ20 mm
  • Stroke45 mm
  • Port size1/8"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM6×1.0
  • CushionFixed TPU bumper (both ends)
$41.70 $48.20Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ20 stroke, adjustment, mounting and version on one page All ACEJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB

The ACEJ20X45-30SB is a double acting ISO 21287 compact cylinder with a 20 mm bore and a 45 mm stroke that an external stop screw trims anywhere in a 30 mm window, giving a usable extend range of 15-45 mm. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N, rising to 219.9 N at 0.7 MPa, with a theoretical ceiling of 32 kgf at 1.0 MPa. The male rod thread (B code) bolts straight into knuckle fittings, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-stroke sensing.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into shallow fixtures and guarded cells. A fixed TPU bumper at each end absorbs end-of-stroke shock, the hard-anodized aluminium body runs on an S45C hard-chrome rod, and speed spans 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB Technical Specifications

ModelAirtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ20 mm
Stroke45 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/8"
Rod threadM6×1.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø20mm)

PressureForce (both ways)
0.5 MPa118 N
0.7 MPa165 N
Max (@1.0 MPa)24 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB

ACEJISO 21287 compact cylinder (adjustable-stroke).
20Bore size in mm.
×45Stroke length in mm.
-30Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB Is Used

precision_manufacturing

Fixture clamp with changeover trim

On a small machining fixture, the stop screw sets clamp position anywhere from 15 to 45 mm, so one cylinder handles several part heights without remounting; 157.1 N at 0.5 MPa suits light clamps.

sensors

Pick-and-place with position feedback

The fitted -S magnet lets CMSE / DMSE switches report extend and retract on a compact electronics assembly gantry where the short body must fit under a low guard.

compress

Bench press for small inserts

Pressing bushings or labels into plastic housings at about 94 N of usable working force, with the male rod thread driving a knuckle for straight-line thrust.

Is the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB the Right Cylinder?

The 30 mm trim window is ideal when one cylinder must serve several product widths - set the stop screw once per changeover instead of swapping cylinders. Remember the adjuster is a mechanical end stop only: on air loss the piston still drifts, so add a valve or external lock if you need position holding. FA flange or LB foot mounts and I/Y rod knuckles fit the ISO 21287 face, and the -S magnet on this model pairs with CMSE / DMSE switches.

AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB FAQ

The -30 code is a 30 mm adjustment window: an external stop screw shortens the 45 mm extend stroke by up to 30 mm, so the working range is 15-45 mm. It is a mechanical end stop, not a mid-stroke lock - the piston still drifts if air is lost.

The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for tight jigs and guarded machines. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped to the body for position signals. FA flange, LB foot, I and Y rod knuckles bolt to the standard face, the port is 1/8", and a fixed TPU bumper at both ends absorbs end-of-stroke shock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-30SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ20X45-30SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.