
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X50-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X50-30B is a double acting ISO 21287 compact cylinder with a 20 mm bore and a 50 mm stroke that an external stop screw trims on site within a 30 mm window, giving a usable extend range of 20-50 mm. The male rod thread (B code) bolts straight to tooling, and the PT port is 1/8".
The hard-anodized aluminium body with an S45C hard-chrome rod keeps the mounting length about 50% shorter than an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. The optional -S magnet enables CMSE / DMSE switches; without it no magnet is fitted. Speed range is 30-500 mm/s.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
About 94 N of usable holding force at 0.5 MPa secures aluminum brackets in a machining jig, with the short body fitting where a full-length profile cylinder cannot.
The male-thread rod drives a pusher finger that diverts cartons at 30-500 mm/s, and the 30 mm trim window dials the throw to match lane width without re-plumbing.
Step up to 25 mm if your pull-side load exceeds about 118 N. Note the stop screw is a mechanical end stop only - on air loss the piston still drifts, so do not use it to hold a load mid-stroke. FA flange or LB foot mounts and I/Y rod knuckles fit the ISO 21287 face; order the -S code if you need CMSE / DMSE position sensing.
Quick checklist
Theoretical maximum is 32 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um. The extend stroke is adjustable from 20 to 50 mm via the stop screw, and the port is 1/8" PT.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends to absorb end-of-stroke energy. Sensing requires the optional -S magnet code; this model has no magnet fitted, so no CMSE or DMSE switch can be read until you order the -S version.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.