
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X55-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 55mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X55-50B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 55 mm stroke anywhere within the ordered 50 mm window, giving a usable range of 5-55 mm without changing the cylinder. The male rod thread (B code) bolts straight to tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. A hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends handle 0.15-1.0 MPa (22-145 psi) air at 30-500 mm/s. Note: no magnet is fitted on this model - order the -S code if you need CMSE / DMSE switch sensing.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X55-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 55 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A tabletop cartoning line uses the 55 mm stroke to kick finished cartons off the flight; the compact body fits where a full-length profile cylinder cannot, and the male rod thread accepts a custom pusher plate.
A diagnostic sample-prep module presses microplate seals with about 94 N of usable force at 0.5 MPa; the stop screw sets a repeatable short stroke for each plate format.
This unit covers 5-55 mm of extend stroke via the 50 mm adjustment window, but the stop screw is a mechanical end stop only - it does not lock the piston mid-stroke, so on air loss the rod still drifts. Mount with FA flange or LB foot, add I or Y rod knuckles, and order the -S magnet code if position sensing with CMSE / DMSE switches is planned.
Quick checklist
Push is 157.1 N and pull 117.8 N at 0.5 MPa; at 0.7 MPa push rises to 219.9 N and pull to 164.9 N, with a theoretical maximum of 32 kgf at 1.0 MPa. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, port 1/8", rod 10 mm with male thread, and the extend stroke is adjustable from 5 to 55 mm via the 50 mm window.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA flange or LB foot mounts plus I/Y rod knuckles bolt straight to the standard face. Sensing is not possible on this code: the magnet is the optional -S order code, so add -S to the model number to enable CMSE / DMSE switches. The fixed TPU bumpers at both ends only soften end-of-stroke impact.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.